JR180DWD Makita Saw - Parts

Blade Clamp (this Is Not Compa This authentic item is supplied by the original equipment manufacturer for use with Makita reciprocating saws. It is an identical replacement for a missing or a faulty blade clamp that was installed o...

Push Pin This part is an OEM sourced directly from the manufacturer for use in Makita reciprocating saws. The push pin goes between the compression spring and the blade clamp. It is a very small part and will ...

Armature Assembly 18V

Insulation Cover

Spring Terminal (Plus)

Slider

H.S.H. Bolt M5x50,jr3030tt1

Heat Sink

18v Nimh Battery 1833 (2.2ah)

Gear Housing Cover, Jr180dwb

Spring Terminal (Minus)

N/A