Models > JGD8430ADB14 > Instructions

JGD8430ADB14 Jenn-Air Cooktop - Instructions

All Instructions for the JGD8430ADB14
106 - 120 of 122
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fan knob cracked and would not turn
The identical knob to replace cracked knob, arrived 2 days after I ordered it on line. It was replaced in minutes and we were very pleased to find this available service.
Parts Used:
Knob - Chrome
  • WILLIAM from CHESTERFIELD, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
base of knobs were cracked
just replaced the knobs and they were a perfect match,can not tell the new from the old ones. thanks for the prompt shipment
Parts Used:
Knob - Chrome
  • gene from selma, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Burner knobs broken
Lifted upwards on old knobs to remove then aligned new knobs fittings, pressed downward to instal new knobs. Really easy.
Parts Used:
Burner Knob - Stainless Color
  • Charles from Grenada, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Knob
Take old off and put new on
Parts Used:
Knob - Chrome
  • KEN from REDDING, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Burner Knobs would crack in the middle
The original knobs were poorly made and kept braking. After the third set, which were very expensive for some plastic knobs, I read this web page for help. Based on what I learned and what I read, I glued the metal sleeve in the knob shaft with some super glue. I then wrapped the shaft with copper wire and spread some industrial glue over the copper wrapping, which looked like a spring around the shaft. I have had no problems in the last month. I hope it keeps up.
Parts Used:
Knob - Chrome
  • John from Whitesboro, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
cracked knob on stovetop
the cracked knob left the round piece of metal that is part of the knob inside the stovetop, preventing the new knob from being installed at the right height. We were able to remove the metal piece and place the new knob on at the correct height. We were very pleased at how fast the part was received.
Parts Used:
Knob - Chrome
  • Carol from Port Charlotte, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
burner igniter didn't light burner
I removed the burner by unscrewing 2 torx head screws, disconnected wire from electrode, removed screw holding electrode, inserted new electrode,connected wire, installed burner and fired it up.
Parts Used:
Burner Electrode
  • Richard from Sanbornton, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Burner did not light
Ordered online Tuesday, delivery by FedEx on Wednesday. Removed the old "popped" in the new and it worked right away. It was that simple. Thanks so much.
Parts Used:
X-Large Burner Head with Electrode
  • Diane from Monee, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Knobs were damaged/distorted due to wear
Pulled off the old knobs, pushed the new ones on. Could not have been easier!
Parts Used:
Burner Knob - Stainless Color
  • Sara from Mahtomedi, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Damaged Ignitor
Simply unscrewed the old one and installed the new one and we have ignition!
Parts Used:
Burner Electrode
  • David from Carson City, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken plastic chrome knobs
bought new ones and pushed them onto D shaped posts total time 90 seconds they may break again in 10 years but I am to lazy to reinforce them
Parts Used:
Knob - Chrome
  • Curtis from Gilbert, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Original Burner Knob broke at the shaft
Simply took off the original knob and replaced it with the new one.
Parts Used:
Burner Knob - Stainless Color
  • Katherine from dayton, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
burner ignator split--
unscrewed old ignator---replaced w new--done deal!!!!
Parts Used:
Burner Electrode
  • KARL from OCEAN, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
plastic split
remove knobs from pkg, remove broken knobs from range insert new knobs wallah done.
Parts Used:
Knob - Chrome
  • Walter from Spring, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The female D stem fitting of the control knob cracked, we could not turn on / off or control temperature to that heated area.
We replaced the control knob with an exact replica from PartSelect at a very reasonable price – Thank you.
Parts Used:
Knob - Chrome
  • Richard from Harrisville, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JGD8430ADB14
106 - 120 of 122