All Installation Instructions for Inglis Refrigerator I8TXCWFXQ01

ice maker

My husband is an appliance man and he did the work.

Parts Used:

ICE MAKER KIT-PKG ASSEMBLY (EZ

Ann from MC CUNE, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator not freeze

i didn't repair replace capacitor, bi metal defrost thermostat and still not freeze also replace light door switch any suggestion thanks

Parts Used:

Refrigerator Bimetal Defrost Thermostat

edgar from PAWTUCKET, RI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

freezer (later fridge too) wouldn't stay cold~

****Make are you order Capacitor & Starter relay too (we ordered separtely so had to pay shipping twice)**** Super easy just open access panel on back near compressor and remove retention clip with fingers, remove & replace both capacitor & starter, put clip and access panel back on, plug in and allow 8 hours to cool! Works like new again! Hope it goes another 10 years

Parts Used:

Refrigerator Capacitor

David from MARYLAND HTS, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

I broke the glass shelf that covers the crisper.

I placed the glass into the frame. I attempted to slide the frame into the refrigerator over the two crisper drawers. It wouldn't go.

My son came to my rescue. "Mother, the drawers slide into the frame". He took the drawers out, put the frame in the refrigerator, placed the glass cover into the frame, then slide the drawers back into the rungs made for them in the frame. Easy peasy! ;

Ordering was made smooth with a good program for finding parts.

Thank you.

Parts Used:

Refrigerator Crisper Glass Shelf

Kathryn from CHARLESTON, WV
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Broke light switch while cleaning

use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks

Parts Used:

Refrigerator Door Switch

Gail from Golden, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The plastic water fill tube got cracked when we moved. I called a parts company and they told me they couldn't just sell me the tube I would have to buy a whole kit for about $50 dollars. I decided to glue the tube. It worked for a while then it started leaking. So I thought I would have to buy

I hand screwed the fill tube into the water tube and stuck it into the freezer hole. I screwed the fill tube to the back of the refrigerator.

Thanks so much! You saved me a bundle!!

Parts Used:

Ice Maker Water Fill Tube Kit

Joseph from Chesterfield, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

none

install ice maker 2 screws wire harness pluged in done

Parts Used:

ICE MAKER KIT-PKG ASSEMBLY (EZ

Joseph from BONITA SPGS, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

BROKEN CHRISPER GLASS

TOOK IT OUT OF THE BOX, AND LAID IT IN THE GROVE THAT IT GOES IN.

Parts Used:

Refrigerator Crisper Glass Shelf

Larry from KUNA, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

The Light Socket Burned Out.

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Parts Used:

Light Socket Kit

MATTHEW from STOCKTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Connection leaked as tube entered freezer

Followed video and had one problen, the metal pipe would not release as shown,so I used a hacksaw between the plastic and metal pipe, removing the metal pipe from inside as the video shows. Good instructions.

Parts Used:

Ice Maker Water Fill Tube Kit

Robert from MERRIMACK, NH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Wasn't getting or staying cold enough

Watched the installation video and was able to make repair easily

Parts Used:

Temperature Control Thermostat

Christopher from CASTAIC, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

The glass shelf fell and broke while being washed

The glass shelf replacement simply fits into the plastic frame which holds it and completes the shelf unit above the crisper bins.

Parts Used:

Refrigerator Crisper Glass Shelf

Dana from Oldsmar, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Light rocker switch broke and refrigerator light couldn't go on.

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Parts Used:

Refrigerator Door Switch