GZ2727GEHB Maytag Refrigerator - Instructions

I used a knife blade to slip under the edge of old switch to pray it out of the hole it was inserted into, switched the wires and replaced the new switch into the same hole. It took about five minutes!

Obtained the part from part select in record time. Exact part arrived next day and changed out the faulty part within an hour. great service and have already booked-marked the website should future appliance parts be needed. Fair price too!

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!

Pried out ice blade bar and removed broken water fill cup and replaced with new one.The whole repair costs $9.52 So I saved $ 190 over the cost of Appliance man visit!
It would have been $150& $50 for visit to replace ice maker unit.

I read what other people had done so I tried the easiest solution--Forced, without breaking, the plastic & fit the ring right where it needed to be.

it was a cake walk,removed a few screws unpluged assembly installed new switch didnt get shocked, nothing started on fire, ice came out like it should afterwards

I read all the other repair stories and followed them. The only thing I would add is to use Lock ease on the screws (had trouble with getting two out) and yoke before removing them. I sprayed the lock ease on two screws and the yoke, left it sit for 30 minutes and everything removed smoothly. Especially the yoke that everyone wrote as the most difficult thing to get off.

Removed icebin from refrigerator and placed it in sink. Saw the iced over hole where the motor mount used to be. Removed screw from under shelf with nut driver. Used a hair dryer to melt ice buildup from shelf (don't forget towels to soak up water). Remove the shelf out 6" to unplug harness from back wall. Pull shelf out onto counter to remove all screws. To remove u bracket from motor gently tap bracket with hammer to "break loose" bracket from motor. Put the motor shaft through new shelf hole and attatch screws and u bracket. Put shelf back in and reconnect wire harness to wall. Test the motor by pressing sensor to dispense ice. If all works Finnish reconnecting and put ice bin back in to collect ice. I emptyed my ice bin prior to putting back in.

Removed the food out of the fresh food door. Removed the top hinge cover, removed the 3 nut screws on top. Lifted the door off of the bottom pin. Set the door to one side. Removed the lower hinge pin with a screw driver and replaced with new product. Lifted door back onto lower hinge pin, secured the top pin hinge with the 3 nut screws, replaced the top hinge cover and placed food back into the door. Done in less than 15 minutes.

I simply removed the old brackets and replaced with the new ones. Can't get any easier than that!

Since the old one kept falling off the disassembly was very easy. I lined up the five prongs on the new cover with the holes on the unit and snapped it into place. Job done,

Good news/Bad news story. One of your parts view showed the side rails without the drawer rollers another showed the rails with rollers. I ordered the rails expecting that they would come with the rollers attached. They did not so I had to place a second order for two rollers and two screws. As I live in CA, delivery was just a day for first order, but for second I ordered on Sat, delivery was on Tuesday. My complaint was double shipping and handling so total was almost $50.for two very simple items.

My husband did the replacement of the filter, so it was really easy for me. Easy for him too! The best part was this company had the best price, and the part was here in no time!

Having a diagram really made the job easy. The best surprise was ordering the part on Monday and having it my doorstep on Wednesday. The last time I had a repairman work on the same refrigerator it took two weeks for him to get a part. Who needs the Maytag repairman with service like this.