All Installation Instructions for General Electric Dishwasher GSD3361K00SS

dishwasher rack corrosive

Very simple. First recieved Top rack. used a flat head screw
driver to remove cone/tower, put cone on new rack. put rack
on grove slided in easily. Took old rack out.replaced with new easily

Parts Used:

UPPER RACK

LOWER RACK

karen from Corona, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Lost the knob timer to the dishwasher, 2 year and 7 year old somehow made it dissappear - magic.....

Simpy went onto partselect.com and walked through getting the part, plugged it in after receiving in less than 2 days a voila - we are back in business

Parts Used:

Timer Knob

Joshua from Wylie, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

The problem was that the dishwasher lower sliding shelve was rusting out and coroding

We ordered a new lower shelve and slid it in on the rollers and it is secure and works fine.

Parts Used:

LOWER RACK

Carolyn from Novato, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Door leakage

The instructions provided are very good if I had done before. My concern was getting the gasket to sit properly at the bottom where you cannot see. I removed the inside of the door (7 screws) and this made it easier to assure gasket sat properly in the track. may have cost an extra 15 minutes but worth it. If I do again I will take door apart again, however I think this is fixed and should not need attention again.

Parts Used:

Door Gasket - White

Doug from NEW YORK, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken spring on door.

See GE web site for repair instructions. Take out screws at top of door. Slide unit out there is a spring on each side of the door just look at the good one for details. Easy fix. About 30 minutes.

Parts Used:

Hinge Arm Link

Ron from SOUTHPORT, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Water not pumping out of tub.

Repair was easy. However, this did not solve the problem.

Parts Used:

Drain Solenoid and Bracket Assembly

Ray from LOUISVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Couldn't drain water

I connected one end of hose to the drain using a hose clamp and screwdriver then connected the other end to the dishwasher using anouther hose clamp and a screwdriver..

Parts Used:

Drain Hose

Janice from Rockville, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Toe kick not included

Removed screws and replaced the part. It couldn't of been earlier. Only problem this kit didn't include a toe kick and we are having a hard time finding it.

Parts Used:

Long Front Panel

Victoria from Flower Mound, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

replace door gasket

from the information previous customers had written.
it saved a lot of fustration and time
and best of all the dish washer does not leak.

Parts Used:

Door Gasket - White

forrest from stuart, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The top drawer of the dishwasher would extend past the support rails.

The top right rail, facing the dishwasher, has a self lock tab. Using pliers, straighten the lock tab, insert the cap and then restore the lock tab to it's original position.

Parts Used:

Dishwasher Rack Slide End Cap

Daryll from Newville, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Cap had broken off the top rack, it kept sliding down

I just had to play around with it to attach the new cap without breaking it.....never did this before but eureka! it worked.

Parts Used:

Dishwasher Rack Slide End Cap

Cindy from Davidson, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Racked rusted out

Simply removed the old rack and installed the new rack.....easy as 123 ABC. Dishwasher still works fine but the bottom rack had rusted out. Not sure if this is common for this Hotpoint dishwasher as my deciding factor to order from here was that others had the same problem as me.

Parts Used:

LOWER RACK