All Installation Instructions for General Electric Dishwasher GSD3300D50CC

threads broke on rinse aid fill cap

Replaced with a new rinse aid fill cap.

Parts Used:

Rinse Aid Fill Cap

Russell from Columbia, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Lower dishrack getting rusty in spots

Just lift out the old dishrack and put in the new. Very easy and straightforward. Easy to order, unit came assembled. Happy customer.

Parts Used:

LOWER RACK

Catherine from South Hadley, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

dishwasher would not drain

replaced solenoid. worked properly after repair

Parts Used:

Drain Solenoid and Bracket Assembly

gary from Farmington, NM
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher wouldn’t start

Took the screws out of the back of the doorl located the switch and replaced it put screws back in and it was fixed

Parts Used:

Interlock Switch

Stephen from MARENGO, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher would not start

Removed panel to access the interlock switches. There were two. The button on one switch was fine and the button on the other would not depress. Ran a continuity test and it failed. The switch also had a burnt smell

Parts Used:

Interlock Switch

Dameon from SMYRNA, DE
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

excessively delayed delivery

I couldn't do the repair because the parts arrived a week after I left, even though I paid extra for speedy delivery. And there was ZERO customer support - the phone message said they would not answer the phone, and the email response was a generic FAQ.

Parts Used:

Lower Spray Arm Base

Circulation Pump Impeller Kit

Bonnie from KILLINGTON, VT
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Broken plastic spray arm

There's a video on youtube from this site on how to install spray arm and base. Great video. Great price

Parts Used:

Lower Spray Arm

TRAVIS from Webster, MA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

rusted/corroded lower dishwasher basket

removed old drawer-like basket, installed the new duplicate replacement part. Easiest "repair" I've ever done!

Parts Used:

LOWER RACK

Elaine from Oceanside, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Wires wee very rusted and some almosth rusted through.

The lower dishrack just lifted out and the new one placed in. The upper rack had stops at the end of the slides which could be removed with the help of a flat blade screw driver, old rack slipped out, new rack slipped in and the stops replaced on the end of the slide which keeps that upper rack from coming al the way out of the dishwasher. There was a link to a "how to do video" on the email order confirmation. It just gave me reassurance that I could easily do the job.

Parts Used:

LOWER RACK

UPPER RACK

Roy from TUCSON, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Door latch broke

Removed the old one from its slot and slid the new one into it.
No instructions needed.

Parts Used:

Door Latch Kit

Barbara from TAMPA, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

dishwasher did not start

Took out interlock switch (two leads) and replaced with new one. As simple as that.

Parts Used:

Interlock Switch

Lawrence from ROLESVILLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Rinse Agent Tank Leaks

The following steps were performed: 1) Disconnect power to the dishwasher 2) Unscrew all the screws on the inside of dishwasher door. 3) Remove outside plate on bottom of dishwasher. 4) Separate the dishwasher door after all screws are removed and pull out the old dishwasher rinse agent tank. There is a screw that needs to removed that holds the tank in place as well. 5) Snap in the new rinse agent tank and tighten screw in that holds tank in place. 6) Gently put the inside door back in place. Make sure all the holes line up correctly. 6) Put back the bottom plate of dishwasher. 7) Turn on the power again. You have now completed the repair.

Parts Used:

TANK RINSE AID Assembly

SCR 8-18 B POR 1/4 Stainless Steel

Paul from Lithia, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 10 people found this instruction helpful.

Was this instruction helpful to you?

rack slide end cap missing

installed part on inside end of rail. no tools needed. original part wouldn't stay on rail. finished in 2 minutes
wife happy

Parts Used:

Dishwasher Rack Slide End Cap

Carrell from Cochranville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

New dishwasher came with a warped roller wheel (upper rack)

I removed the warped roller wheel and clipped the new one in place. Then I screwed the rail guides back on the dishwasher and guided the upper rack back onto the rail guides. Easy peasy.

Parts Used: