GLM23KESBGS General Electric Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker freezing up and not dispensing cubes
I tried to follow the video...it looked easy enough to do and would have been if the trim came off! I had to go to the reviewer who said to undo the 3 springs under the keypad (found on the white part behind the touchpad). I just took an eyeglass screwdriver and pushed up...it was easy to follow the solenoid installation video from there! If I can do it...anyone can! I'm a 65year old female.
Parts Used:
-
Patricia from Croton on Hudson, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker door was not closing.
Changed after watching U-Tube instructions. Faced trouble with the magnet assembly, had to redo it again, and it worked.
Parts Used:
-
Idichandi from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice door dispenser would not close on the freezer causing frost buildup on the inside and moster on the outside
I replaced ice dispenser solenoid which stuck due to the moisture causing it to rust I do recommend changing the rubber door flap also which allows the cold air to leak out therefore causing the solenoid to form rust
Parts Used:
-
Lee Ralph from Grenada, MS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The solenoid was broken-water dispenser would not work
Removed the dispenser panel and replaced-less than 10 min and a savings of $300.00 for a service call.
Parts Used:
-
Dana from Torrance, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Dispensing Door would not close
Not only was your parts selection very easy to understand,
The Video shows exactly how to install that part.
This was So Easy to repair. I thought I would have to take
the door apart from the inside but the repair was completed
with the door closed and took about 10 to 15 min. to complete.
The Video shows exactly how to install that part.
This was So Easy to repair. I thought I would have to take
the door apart from the inside but the repair was completed
with the door closed and took about 10 to 15 min. to complete.
Parts Used:
-
Lee from Plainfield, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Some screws was rusted so I take more time.
I just follow to the video and take step by step. It's was very helpful and easy. Thank you.
Parts Used:
-
huan from garden grove, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!