All Installation Instructions for General Electric Dishwasher GLD3866T10SS

Rinse cap was broken

Watched online video, repaired myself in under 10 minutes.
Easy fix with video instructions

Parts Used:

Detergent Dispenser with Rinse Cap

DENNIS from MAUMEE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Missing wheels

The wheel kit came with axel's to support them. They snapped in place in seconds. No instructions provided, but installing method was obvious.

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Denise from PALERMO, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

a couple of retaining ears were broken from the cover allowing the the switches and plunger to move out of place

took screws from inside door panel and replaced the cover taking care not to allow plunger and spring to pop out put panel in place and screwed down

Parts Used:

Interlock Cover

charles from royal oak, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Upper tray rollers broke

Three of the four roller of my upper shelf of my dishwasher had broken...I went on line and in ten minutes ordered my rollers....a few days later rollers came and within fifteen minutes my dishwasher was up and running.....thank you so much....I will absolutely use this site again for future repairs....Thanks again. Marlene Martin

Parts Used:

Wheel and Stud

Marlene from Hopwood, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

broken off end caps, top would slide off, frustrating.

did it by hand, carefully flair out the plastic piece only enough to slide it into the metal rail.

Parts Used:

Dishwasher Rack Slide End Cap

Paul from Blairs, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Front door on Dishwasher Leaking

Ordered a new tub gasket and, although the gasket went on backorder for two weeks, the repair itself was extremely easy requiring no tools at all!

Parts Used:

Tub Gasket

Rick from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Rack roller and JetDry cap were missing

Opened the package, opened the plastic parts bag, installed the roller and the cap.

Whew!

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Rinse Cap Assembly

Michael from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Leaking from front

I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.

Parts Used:

Tub Gasket

David from North Charleston, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Old parts showing wear

Watched a YouTube video on disassembly, parts replacement, and reassembly.

Parts Used:

Fine Filter

Fine Filter Hub Nut

Suzanne from CHEYENNE, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The soap dispenser would not close.

This was simple. I took the door apart with a portable screw driver. Then I detached the wires and unscrewed the old module and replaced it. I then put the door back together, loaded the dishwasher and it cleaned my dishes. Even for this `old dog' it was easy.

Parts Used:

Detergent Dispenser with Rinse Cap

tim from prior lake, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken Upper Rack Wheel and Stud Assembly

I removed top dishwasher rack, popped off broken studs, and removed wheels from the tracks. I replaced studs on rack by popping them into place, and I slid new wheels back into wheel tracks. I place new studs into wheel assembly, slid rack back into dishwasher and replaced stoppers at the front of the tracks.

Parts Used:

Wheel and Stud

Irma from Smyrna, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

pieces that attach the wheels to the lower rack kept falling off

Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.

Parts Used: