All Installation Instructions for Frigidaire Refrigerator FFHT1621TW1

Brooken Drawer Rail Support

The repair was very easy. I took out the top glass shelf which the drawer is attached to and unscrewed the broken support. Then just lined up the new support and screwed it in place. Placed the top shelf back in the fridge and slid the drawer into place along the new rail supports. Very smooth process.

Parts Used:

Drawer Support Rail - Right Side

Drawer Support Rail - Left Side

Mary Lou from Scranton, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Broken meat traysupport rail

Remove 1 screw, pull out old part, insert new part, replace screw. Takes longer to clean off the fridge shelf than to replace the part.

Parts Used:

Drawer Support Rail - Left Side

Rusty from Newbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Shelf Braket Broke

We ordered a new bracket and it was installed and in in less than 10 minutes.

Parts Used:

Drawer Support Rail - Left Side

June from Littleton, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Freezer door sagged & didn't seal properly

Installed Metal hinge(old hinge was plastic) to take out sag of door.(painted the hinge color of refrigerator as hinge doesn't have plastic appearance cover )

Parts Used:

Upper Hinge

Hinge Bearing

Gene from Chesaning, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Missing shelf.

Just snapped it on.

Parts Used:

Door Bin

Duane from Columbus, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Freezer door sagging due to warped hinge

Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.

Parts Used:

Upper Hinge

Keith from Springfield, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

broken rail

Remove the shelf. Removed one screw. Removed old part and inst. new part with the one screw. Reistalled self.

Parts Used:

Drawer Support Rail - Left Side

Donald from Kaw City, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Right rail broken

removed drawer removed upper shelf turned upside down unscrewed old one installed new one put shelf back in put drawer back in done super easy

Parts Used:

Drawer Support Rail - Right Side

Patrick from Wolverine, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

original door bin broke

took new one right out of the box and snapped it into place

Parts Used:

Door Bin

tim from Newport News, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Support rail for meat drawer broke (again).

Took out the shelf, removed the rest of the broken rail, replaced it. Piece of cake. (Note: The meat drawer support rails on this otherwise good refrigerator are very flimsy and break with some regularity even when the meat drawer isn't heavily filled. A good idea to keep spare support rails at home.)

Parts Used:

Drawer Support Rail - Right Side

Peter from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

meat drawer guide broke

take the shelf out,loosen screw,put on new rail and reattach screw,simple

Parts Used:

Drawer Support Rail - Right Side

mike from apollo, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Needed new drawer for refrigerator to replace broken one.

I broke my drawer on a holiday Monday and Tuesday morning I had the new one in. your party was an exact match, even though the description said it might not be.

Parts Used:

Meat Pan

Nancy from Bellerose Manor, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The Drawer Support Right Side Broke At The Front Tab & The Drawer Fell Down

Took The Shelf Out That The Drawer Was Attached To.Turned It Upside Down.Took The 1 Phillips Screw Out At The Back That The Drawer Slide Was Attached To.Slid The Tab Into The Front Guide,Lined The Screw Hole In The Back Up And Replaced The Screw...Done...

Parts Used:

Drawer Support Rail - Right Side

Roberta from Clovis, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Broken door bin and rack

Needless to say it was very easy. I was most impressed with the delivery time. Regular shipping and it arrived overnight. The parts were exactly what I ordered and were installed in less than 5 minutes.

Parts Used: