Models > FFHT1621TB2 > Instructions

FFHT1621TB2 Frigidaire Refrigerator - Instructions

All Instructions for the FFHT1621TB2
121 - 135 of 178
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
no heat when drying
Replaced thermo-fuse
Parts Used:
Door Rack Freezer
  • Glen from North Tonawanda, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Drawer Supports Broke
In 10 years, this is the second time these drawer supports broke and what a difference to fix. The parts came quickly, fit well and are very easy to install. The fridge is good as new and the cheese/condiment drawer is back where it belongs. Good quality and easy to do.
Parts Used:
Drawer Support Rail - Right Side Drawer Support Rail - Left Side
  • Joan from Brooklyn, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Original plastic hinge cracked across the middle
Removed 2 hex screws & old hinge, placed new hinge on cabinet & found that it didn't fit; one hole was about 1/8" off. Had to drill a new hole in cabinet top in order to attach new hinge. Hinge works fine now. I'm glad to find the hinge is metal; original one was plastic.
Parts Used:
Upper Hinge
  • Al from Sarver, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken door rack
snapped old one out by hand and installed new one with ease been broken for year could not believe how easy it was
Parts Used:
Door Rack
  • Mike from Whitmore Lake, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The Drawer Support Right Side Broke At The Front Tab & The Drawer Fell Down
Took The Shelf Out That The Drawer Was Attached To.Turned It Upside Down.Took The 1 Phillips Screw Out At The Back That The Drawer Slide Was Attached To.Slid The Tab Into The Front Guide,Lined The Screw Hole In The Back Up And Replaced The Screw...Done...
Parts Used:
Drawer Support Rail - Right Side
  • Roberta from Clovis, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken door bin and rack
Needless to say it was very easy. I was most impressed with the delivery time. Regular shipping and it arrived overnight. The parts were exactly what I ordered and were installed in less than 5 minutes.
Parts Used:
Door Rack Door Bin
  • Don from Saucier, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Side Rail To Drawer Broken
I ordered a new rail and it came up in one day. It took me 10 min to fix it
Parts Used:
Drawer Support Rail - Right Side
  • Lee from Warren, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
shelf support broke
screwdriver that's it took 2 minutes
Parts Used:
Drawer Support Rail - Right Side
  • Daniel from City of Commerce, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
rail broke
remove shelf,unscrew rail, put in new rail,put in screw, return shelf
Parts Used:
Drawer Support Rail - Right Side
  • ANN from SNYDER, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drawer slide broke due to overloading
installed new slide support. No Problem. I would also like to compliment your service personnei on their prompt response. I believe I received the part within three days after ordering. Thank you
Parts Used:
Drawer Support Rail - Left Side
  • Charles from Harvey Cedars, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken right rail to dràwer.
The part came right away, It only took me a couple of minute's to fix. I just flipped the shelf around. Slid one end of the rail in a slot, and put one screw in on the other end. Finished.
Parts Used:
Drawer Support Rail - Right Side
  • Gregory from Circle Pines, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken Door Rack
Snapped new door rack into place.
Parts Used:
Door Rack
  • Bert from Saint Augustine, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
support rail broke when overstuffed meat drawer forced closed
Disassembled shelf and drawer to find broken rail. Found parts number on website's "exploded" parts view. Reassembled with new part and drove one screw to secure. FORTUNATELY I kept old broken part which had special screw needed to reassemble. I would have expected replacement part to include its attachment screw, but it did not.
Parts Used:
Drawer Support Rail - Left Side
  • Kenneth from Corpus Christi, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drawer support broke
After removing the drawer from refrigerator I fixed it on the kitchen counter in less than 15 minutes.
Parts Used:
Drawer Support Rail - Right Side
  • Lowry from Lafayette, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
light socket burned out
snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.
Parts Used:
Light Socket
  • Judith from Gambier, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FFHT1621TB2
121 - 135 of 178