FAFS4073NW1 Frigidaire Washer - Instructions

Watched your supplied video on how to repair. I did not want to break the washer door sealas described on the video. I removed the two screw on the back of washer that held the top and then slid the top off. I moved the two screws securing the switch at the exterior door. I changed the door lock and switch assembly through the top by moving the connectors one at a time from the old assembly to the new. Replaced the screws to complete. I then changed the door strike by removing the two screws and replacing the new strike. Job complete and washer works fine saving us $200.00. Thank you ever so much PartSelect.com.

After some research online about my Frigidaire Washer, I pre-determined that the problem could likely be the lock mechanism. I ordered the part and it arrived within 3 business days. My son removed the screws from the back of the washer, slid the top off and removed the old part and replaced it with the new part. It took about 20 mins. The machine is now working properly again. The door catch that I ordered did not work with the door lock I ordered. However, the old door catch that was still in good working order does work with the new door lock and switch assembly that I purchased.

Removed the door lock and switch assembly. With needle nose pliers, I removed the metal ring around the washer gasket. Removed two screws on assembly and removed the entire assembly. Noted part number and ordered part which came in 3 days. Reversed the above instuctions for removing the assembly. Was washing within the hour. By the way, I am a 65 year old woman.

It went easy

The entire process, from diagnosing the problem, ordering the part, and instalation was fantastic! I ordered the part Friday afternoon and had it at my door Saturday afternoon. I was so relieved to read the installation posts from other customers demonstrating how common this issue is and how easy it was to fix! I simply watched the installation video that was sent with my confirmation email. It is also conveniently located on your website. I had the new part installed in less than 30 minutes AND before my husband got home! Thank you Partselect.com!

I unscrewed the two screws and replaced with new door striker and used the same two screws I took out. It took me seriously less than 2 minutes and I am a woman!

took the 2 screws out, removed the old and screwed in the new.Piece of cake. What stod out in the process was Part selects follow up with email and video of how to replace. They are great....

I took off the broken part with a screw driver. I easily found the needed part on your website. After I ordered the part, it came within 2 days. It was the correct part and was replaced within 10 minutes of opening the package. Thanks for the great, easy and quick service!

I found this wonderful web site, after removing the cover and running a diagnostic to find it was either the door lock or the TCP control board. Control board unable to find any information on was scared to call the repair man as they usually cost about $500.00. I am a single mother and order the door lock and just like that I was able to repair it myself. Thanks you so much!!!

It took all of five minutes, two screws and done. Saved $150.00 on the service charge, while the part cost less than $15.00 for the parts including S/H.

Followed the YouTube video and was done in less than 10 minutes. This is the second time that I've purchased this part from your company and will continue to return because of the high usage of our washer, the part needs replacing every 3 years or so.

Removed 2 screws , unplugged the old switch , replaced with new one and secured with screws . Easy !!

Unable to get the door hinge off the machine after 6 years, one screw would not budge and was beginning to strip the head. If you take the door apart while still mounted to the hinge, you must have another person hold the door pieces securely, or you will likely break the tab on the front door piece that fits into the hinge bushing. Don't let that happen! Easy does it, hold it still, unscrew all the screws and gently pop the inside piece away from the outside piece, HOLDING IT SECURELY. Use gloves so you don't get cut, that glass is really sharp. Good idea to use some masking tape and cover the cut edges...I thought of this too late...wish I'd have done it. Lining up the bushings is probably the hardest part while getting the front and back pieces together with the big glass bubble secured, and again, HELD SECURELY by another person. This really was easy, but I wish someone had mentioned whether to take the hinge off or not, unfortunately, I could not. I had to get creative, and the fix was perfect, even if I did initially break the tab that lines up the bushing...I wasn't spending ANOTHER $90 for the teensy tab being broken. It works perfectly with my fix - but it won't if you can't fix that tab! I was glad I didn't have to call a repairman!!!

Installation of Part # 131-763-202 door lock and switch Assy.

Note that the only reasonable access to the lock and switch Assy is by removing the front of the gasket between the drum and the cabinet. It is also the only necessary access.

This problem is unique to older models. My experience was a bit frustrating but the solution was finally found. While it took me a long time (and extra parts) to figure out the problem, the solution is actually pretty easy.

IF you have an machine with a black striker/catch on the door, the installation is not entirely straightforward, The black striker/catch on the door has an L-shaped lower prong that engages the door latch. This striker/catch will NOT work with the newer door lock. The required striker/catch is part # 134-456-600. It is white, and has a diamond-shaped upper prong.

When you remove the older-style lock (Part # 1231-269-400) that accepts the black striker/catch, you will immediately notice that there are more electrical connections on the new part than on the old. This requires some minor rewiring.

The two connections (Bl/W and w) that go to the latch solenoid are unchanged and attach to the brown solenoid on the new part.

The arrangement of the other connections on the new lock/latch is as follows (numbering is mine)

1 2 3 4 5 6

Terminals 2 and 3 are the “PTC” and must be connected to the red (double) and white wires that are on a special double plug. The plug must be cut off and replaced by regular (F) spade connectors. DO NOT be tempted to insert the double plug into the new lock. Although it fits, it does NOT work.

Connect the two door-lock switch wires (Bk and Bk/R) to terminals 5 and 6.

Note that with the new lock, the machine has to rest a while before the catch is released, the door catch is not released as soon as the door-lock light goes off.

Note also that the actuation of the switch in the door lock is NOT purely mechanical as in the older door lock. Pressing the striker/catch into the lock will NOT close the contacts between terminals 5 and 6. Some magic happens inside the door lock mechanism through the PTC that closes this switch. This same magic is probably responsible for the delay in releasing the door latch. This drove me crazy for a while as I thought the lock and switch Assy was defective.

The end of the door strike had broken off in the lock. The door strike itself went on in just a few minutes. The time consuming part was getting the piece that had broken off out. After trying with tweezers to get it out, we took the lock off the machine and finally got it out. So....if the door strike looks damaged or isn't shutting properly, replace it before it breaks off inside the lock. We were pleased with how quickly it came. We ordered it Sunday evening and it came Tuesday morning.