D55146 DeWALT Compressor - Overview
Models starting with D55146
Click on the best match to narrow your results.
- D55146 (Type 2) DeWALT Compressor (4.5 gallon, 200 PSI Hand Carry Compressor)
- D55146 (Type 3) DeWALT Compressor (Compressor)
- D55146 DeWALT Compressor (Type 1 Compressor)
- D55146 (Type 4) DeWALT Compressor (Compressor)
- D55146 (Type 1) DeWALT Compressor (Compressor)
- D55146 (Type 5) DeWALT Compressor (Compressor)
- D55146 (Type 7) DeWALT Compressor (Compressor)
- D55146 (Type 8) DeWALT Compressor (Compressor)
- D55146 (Type 9) DeWALT Compressor (Compressor)
- D55146R (Type 9) DeWALT Compressor (Compressor)
Keep searches simple, eg. "belt" or "pump".
Ball Valve
PartSelect #: PS10187952
Manufacturer #: N072023
This genuine OEM replacement drain valve is designed for use with a variety of DeWalt air compressors. Made from durable metal, it allows you to easily open or close the valve with just a quarter turn...
$22.04
In Stock
Order within the next 10 hrs and your part ships today!
Common Symptoms of models starting with D55146
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
Parts Used:
-
Tim from Tucson, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Parts Used:
-
Debra from PRESCOTT VLY, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Parts Used:
-
Cary from SAGLE, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!