This genuine OEM replacement drain valve is designed for use with a variety of DeWalt air compressors. Made from durable metal, it allows you to easily open or close the valve with just a quarter turn, making tank draining quick and hassle-free. If your current valve is leaking or hard to turn, this part is a simple fix to keep your compr...Read moreessor running efficiently. It’s sold individually, and installation is straightforward—just be sure to check your model’s manual for proper fit and instructions.
This is a genuine manufacturer sourced replacement regulator/manifold for air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Includes regulator body, two (2) gauges, two (2) brass quick connect fittings and a regulator knob. Make sure to unplug the air compressor release all the air from the tank before installing this part.
The check valve attaches to the tank and helps to let air into the tank. It is made out of metal and is priced individually. This is an OEM part sourced directly from the manufacturer and is used in compressors made by DeWALT and Bostitch. It will need to be replaced if it breaks and may require a screwdriver and a wrench set to do the replacement.
This genuine OEM replacement kit is designed for use with select DeWalt air compressors and includes the most commonly needed parts to fix low compression issues. The kit comes with a cylinder tube, valve plate O-rings, and a complete piston assembly with bearing—everything you need to restore performance. Please note: This kit does not i...Read morenclude the valve plate, head gaskets, or other compressor components. If your compressor is losing power or not building pressure properly, this kit may be the solution. To install, you’ll need a screwdriver and a wrench, and it’s always a good idea to refer to your model’s manual for step-by-step instructions and compatibility.
This is a genuine manufacturer approved replacement regulator bonnet designed for use with air compressors. This is an important part of the regulator which helps to adjusts the pressure of the air coming from the tank to the desired level. It is made out of plastic and it is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Can't find this special screw used on many housings etc
4 of 6 peoplefound this instruction helpful.
Tim from Tucson, AZ
Very Easy
15 - 30 mins
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called
... Read more AGC-408 by craftsman.
Read less
Was this helpful?
Thank you for voting!
Older compressor runs but no longer builds pressure
3 of 3 peoplefound this instruction helpful.
Cary from SAGLE, ID
Really Easy
30 - 60 mins
Screw drivers, Socket set
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Was this helpful?
Thank you for voting!
Broken ground on original plug
2 of 2 peoplefound this instruction helpful.
Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers
Removed cover & old cord. Replaced with new cord & replaced cover. Works perfect.
My Orders
_WW_1.gif "Page A Diagram and Parts List for Type 4 DeWALT Compressor")
_WW_2.gif "Page B Diagram and Parts List for Type 4 DeWALT Compressor")
