All Installation Instructions for General Electric Microwave CVM1790SS4SS

Bulb burned out

change bulb

Parts Used:

HALOGEN LAMP

Richard from SPRINGFIELD, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No heat.

Replaced the fuse. Result; did not fix the problem.

Parts Used:

Microwave Fuse

Mack from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light Bulbs Failed

Used a phillips screwdriver to remove the screw holding the light cover in place. Removed the two bulbs and replaced them. Closed the cover and tightened the screw

Parts Used:

Halogen Light Bulb - 120V 20W

Wilbert from Stephens City, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

microwave lamp was burned out

took glass cover off being an electrician and saw lamp or bulb was burned out. googled your site and with model number.went on partselect found lamp,orderd it.2 days later lamp arived installed lamp. So easy no running around or making several calls

Parts Used:

Halogen Light Bulb - 120V 20W

Timothy from Swampscott, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Failed Bulb

Screw out-old bulb out- new bulb in- screw back in!!!!!

Parts Used:

Halogen Light Bulb - 120V 20W

Billy from Palm Desert, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Could not find the part at the big box stores - HD or Loew's

Removed the glass shield and inserted the 2 bulbs. Then replaced the glass shield.

The staff were terrific. Thanks so much as it had a happy ending.

Anita

Parts Used:

Halogen Light Bulb - 120V 20W

Anita M from Rochester, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

failed bulb

unscrew one screw and remove bulb and insert new bulb and replace lense with one screw-

as easy as it gets-

Parts Used:

Halogen Light Bulb - 120V 20W

Billy from Palm Desert, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

no night light

took out cover by removing cover. pulled out light bulbs replaced with new bulbs. replaced cover and tighten screw. very easy

Parts Used:

HALOGEN LAMP

CURTIS from WINDSOR, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Had to replace to halogen lamps

Repair was simple; only a phillips head screw driver was required to remove the access plate.

Part Select delivered the replacement lamps within 3 days from the date I placed the order - great service.

Parts Used:

Halogen Light Bulb - 120V 20W

Lee from CUMMING, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Surface light bulbs burned out under microwave

Unscrew (one screw) and take off the cover of the surface light under the microwave (the light over the stove). Firmly pull out the old light bulbs. Align the two prongs of the new bulbs into the socket and firmly push into the recepticle. Replace the cover and screw.

Parts Used:

Halogen Light Bulb - 120V 20W

Thomas from Laguna Niguel, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

How to remove microwave first?

The instructions for removing and installing the new bulbs appear to be great; however, nothing tells me how to remove the microwave from the mounting so I can then invert it and take care of the bulb issue.

Parts Used:

Halogen Light Bulb - 120V 20W

James K. from Humble, TX
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Door Interlock Switch Failed

Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.

Parts Used:

Primary Door Interlock Switch

Michael from Littleton, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

microwave just stopped working

First unplugged the microwave, took top grill off, took control panel off, took wires off and used color coded tape to make sure they went back in right places, took fuse out and replaced it and put every thing back and it all worked fine and to top it off my wife did it all. So it was pretty easy.

Parts Used:

Microwave Fuse