All Installation Instructions for Jenn-Air Cooktop CG206B-E

one of my Jenn Air knobs melted (gas range top)

pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!

Parts Used:

Surface Burner Knob

Gayle from Whitefish, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Holes in the air filter of our Jenn-Air grill

Simply pulled the old filter out and put the new filter in.

Parts Used:

Range Grease Filter

Janice from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broke original Knob

Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.

Parts Used:

Surface Burner Knob

Robert from Tracy, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replacement

This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,

Parts Used:

Range Grease Filter

Barb from Holladay, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Burner knob replacement

Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)

Parts Used:

Surface Burner Knob

Peter from Foster City, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Door Hinge broken

I followed the online video at Jennair.com. The repair was easy and I saved quite a bit of money. I was quoted a price of $534.00 to replace the door hinges, I did it for $96.00 including overnight shipping chargers. I am a very happy lady.

Parts Used:

Door Hinge

Antonio from Davie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Old burners

The issue: the burners were abused by the previous tenant, the burnt grease was clearly visible. They would hardly ignite and the smell of gas was always present.The remedy: new burners. They were hard to find, I was not completely sure about to stove model (it could be quite a search to find the right ones). There is a front burner and a back one. I was not sure from the diagram about the back one, so I called Partselect and someone answered the call right-away. The burners arrived a few days later, and they were the correct ones. The burners are not Jenn-air specific, it looks like several brand names use the same ones. The installation was extremely easy, a few hex screws. The stove is like new. I highly recommend Partselect.

Parts Used:

Rear Burner

Range Front Burner Assembly Black (Glossy Finish)

Alan from Scappoose, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

The original filter was decomposing each time I washed it

I removed the protective grid over the filter and fan, turned the clip that held the filter in place and removed it. I placed the new intact filter for my antiquated Jenn-aire in its place, replaced the protective grid, and am happily continuing to cook on my functional cook top.Thank you.

Parts Used:

Range Grease Filter

Sharon from Kenai, AK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

only one burner on the cooktop worked

Took two screws out of each burner and put new burners in and replaced the screws. A real piece of cake. and they work great. Did not even have to adjust the flames. They were all solid blue and perfect. Bill

Parts Used:

Range Front Burner Assembly Black (Glossy Finish)

Rear Burner

William from Chipley, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

One burner knob melted and one had a broken "stem"

Pop off the old and on with the new. Took longer to open the plastic packaging each came in than to remove & replace old knob with new.

Parts Used:

Surface Burner Knob

Joan from Egg Harbor, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Filter worn out, exhasut fan kept going off

Old filter allowed too much air flow causing exhaust fan to go off....installed new filter in exhaust chamber...release clip on old filter and install new filter (at an angle) in the exhaust box....clamp down clip on edge of filter and job is complete

Parts Used:

Range Grease Filter

John from Cayce, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Burner was not lighting

I removed the pan and then the burner assembly. Used a nutdriver to remove the old front burner. Replaced with the new part, tightened it on, and tested the new burner. Worked first time. Extremely easy. It took less than 5 minutes to replace.

Parts Used:

Range Front Burner Assembly Black (Glossy Finish)

Luciano from Hollister, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Nroken Burnner knob

Slide the knob onto the shaft.

Parts Used:

Surface Burner Knob

William M. from Rock Hill, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Worn out burner grates

Lift and replace. This was the only web site that gave a picture with the correct size of the grates I was looking for. All the other sites gave approximate sizes and universal part numbers instead of the vendor part number. That is why I bought it here. I didn't want to have to return the product because it was off just a bit.

Parts Used: