All Installation Instructions for Amana Refrigerator ASD2575BRB03

Ice Bin Auger Drum was broken.

First, I removed the 6 screws which hold the ice bin to the drum and the front cover. I then removed the screw which holds the door lever and bracket to the ice bin. Then I took the C clip and washer off the end of the auger to remove it from the housing. I removed the plastic nut to remove the auger drum from the auger shaft, being careful to place the blades on the table in the order they were removed. I then installed the new auger drum on the shaft and re-assembled everything in the reverse order. This was really easy for me because I had replaced the auger previously. (about 2 years ago)

Parts Used:

Refrigerator Ice Bin Auger Drum

Charles from Liberty hill, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

the light socket broke apart

I took out the old socket by moving a clip. Reattached the electrical wires, clicked in the socket and that was it.

Parts Used:

Light Socket Kit

Elyse from Skokie, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Replaced filter for ice maker

I removed the filter from the box I took the old filter out and inserted the new air filter put the cover down and that was it.

Parts Used:

Refrigerator Ice and Water Filter

DANIEL from COLUMBIA, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Shelf was broken on one side.

The repair was super easy. It took all of 10 seconds. From ordering the part to repair, I would use part select 100%! Excellent company with excellent parts. Thank you!

Parts Used:

Door Shelf

Tammy from SHERMAN, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

My shelves had cracked and broke

Order new shelves

Parts Used:

Refrigerator Slide-Out Shelf with Glass

Deborah from WALDORF, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

THE SLIDE OUT SHELF WITH GLASS FRAMES WERE BROKEN.

I HAD TO BE CAREFUL...THE SHELF COST ME OVER $200/
iT WAS PACKED SAFELY AND THE GLASS SHELF ARRIVED SAFELY.
REMOVING IT FROM THE PACKING IS NOT TOO DIFFICULT...THE SHELF IS BROAD..

ONCE I WAS ABLE TO BRING IT OUT, I WAS ABLE TO REPLACE IT INTO THE REFRIGERATOR BY SLIDING IT INTO THE FRAME.

I AM NOT A HANDYMAN...BUT THIS WAS EASY.

Parts Used:

Refrigerator Slide-Out Shelf with Glass

HARI from STUDIO CITY, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Crisper shelf glass missing

Removed cheese & cold cut drawer accessing lower crisper drawer glass missing from surrounding frame.
Dropped in glass into grove of crisper frame…Reinstalled (sliding)!above cold cut drawer in its position and the same for crisper drawer..Finished!!!
All good except for $110.00 price tag for a piece of glass

Parts Used:

Refrigerator Shelf Glass

Robert from SAUGERTIES, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Meat Tray For Refrigerator

Placed tray on lower part of refrigerator.

Parts Used:

Refrigerator Crisper Drawer With Handle

Monica from Red Oak, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Door storage bin

Received this item one day after ordering on line. Installed in a snap. Great experience.

Parts Used:

Refrigerator Door Shelf Bin - White

Susan Kohler from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

SIDE OF BIN'S RUNNER HAD WORN OFF

The hard part was getting the right part ordered!
The exploded view needs to be bigger as it is hard to differentiate.
A phone call fixed everything.

Parts Used:

Refrigerator Crisper Pan (Clear)

Roy from BEAUMONT, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Cracked crisper drawer.

Removed old drawer and replaces with new one. A perfect fit. E-bay advertised free shipping, but their price was higher than PART SELECT WITH THE SHIPPING CHARGE.

Parts Used:

Refrigerator Crisper Pan (Clear)

Claude from KLAMATH FALLS, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Catastrophic loss of cooling

It was straight forward enough--removed six screws from the metal cooling coil shield at the back of the freezer compartment and removed the shield. That left the motor and its mounting exposed atop the coil. Removed the electrical leads and popped out the motor and fan. Then I replaced the leads on the new motor, reset it in the mounting and pushed the fan propeller from the old motor on the spindle of the new. Twenty minutes tops.

Parts Used:

Evaporator Fan Motor - 120V 60Hz

Mark from Sugar Land, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

fan was out of balance and rattleing-vibrating

I pulled the wiring harness off the bad motor, removed the fan blades (it was just a press fit and can be pulled off by hand), took out the three screws. The fan on the replacement motor had to be installed out of the fridge. I wiggled the new motor into place and installed the three screws. I cut the wiring harness off the fridge side and cut back the insulation. Using wire nuts I reconnected the wiring. I plugged the fridge back in and it worked like a champ.
The repair went fairly easy. The motor was a bit difficult to get into tight space with my big hands. The wiring harness on the fridge side had to be cut and wire nuts used to reconnect the wiring to the new motor but it was pretty straight forward. Over all the repair was easy except for being in a tight spot. I recommend trying to fix it yourself, you may supprise yourself and save some serious bucks on labor cost to boot.

Parts Used:

Evaporator Fan Motor - 120V 60Hz

David from Leonard, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench set

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

would not come on-replaced thermostats and capacitor would not run--replaced control board runs like new

pulled the control panel removed 2 screws holding the board unpluggedwiring harneses plugged in new board mounted it plugged in the fridge and set the thermostats it came on and temps holding for 5 days so far, very pleased with ease of repair and results, very easy.

Parts Used: