All Installation Instructions for Amana Refrigerator ABB2221WEB0

Gasket on the freezer door was worn out causing "snow" to form on the inside of the freezer.

I pulled off the old gasket and placed the new gasket in the existing groove, shut the door; problem solved!

Parts Used:

Door Gasket - White

Judith from WEST CHESTER, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

broken freezer Handle

I just took the old one off and put the new one on..

Parts Used:

Freezer Door Handle

lisa from sunrise, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Compressor relay failed so I ordered from Parts Select

Unplugged relay and replaced with new one.

Parts Used:

Start Device

David from Dry Ridge, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

All three lights are not working...lights are off but refrigerator still cooling. Also, the control box not lit up to show the temparture for freezer and refrigerator

Used a screw driver to pull old switch. Pulled one wire at a time, only two wires. After wires instlled to new switch push new one back in place where the old one was.

Parts Used:

Refrigerator Door Switch

Antonio from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

7 of 10 people found this instruction helpful.

Was this instruction helpful to you?

No problem

Just snapped in new shelf

Parts Used:

Door Shelf Trim

Sharon from BRANFORD, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

lots of clicking/ both fridg/freezer warm then recooling

went on this website to fine info ALWAYS GO TO TYE OF APP. FIRST THEN TYPE IN MODEL NUMBER...THAT WAY YOUR GOING TO GET THE INFO ONLY TO YOUR APP. then search under symptom .." DO LOTS OF READING HERE ",CLICK ON COSTUMER REPAIRS thats were i found additional info on my problem..now on to the fix.. it stands to reason that on my appy. anyways that if the to parts plug into each other then you should think smart and get both avoid the coming "i told you so, you should have ordered the other part to" didnt cost that much extra... word of advice here .. i have big hands so when " they say" to plug both together then plug into the compressor...DONT!!!! plug the start device in first then plug in capacitor... almost forgot!!!! make sure ALL ELECTRICAL PLUGS AND WIRES ARE CLEAN-NOT BURNT ECT... used a can of electric contact cleaner-NOT ON THE NEW PARTS JUST THE COMPRESSOR AND THE WIRE THAT PLUGS INTO THE CAPAC. .. its just that simple... you will have to let the app. run for at least 24-36 hrs. to get cool enough and stabilize. after that we had to readjust the temp settings a little bit no bigee enjoy!!!!!

Parts Used:

Refrigerator Capacitor

Start Device

scott from GROVES, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator running all the time

Followed the video and installed the new Jazz board. The board cam in 1 piece which had to be separated into two pieces, but the scored area on the board made it less intimidating. At the same time I replaced the two incandescent lamps in the refrigerator area with LED lamps. Getting the housing for the control board apart was the most difficult part, installing the replacement board was a breeze.

Parts Used:

Refrigerator Electronic Control Board

Steve from SOUTH ST PAUL, MN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

The Switch Broke...Absolutely Fell Apart.

I simply removed the old switch using 2 small screwdrivers and the old switch case popped out. I then upluged the wires from the old switch and reversed the process. Didn't take longer than 5 minutes begining to end! Thank you for the great service! Duncan quaid

Parts Used:

Refrigerator Door Switch

Duncan from Metairie, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Dog ate toe grille

Snapped into place with the attached clips. Could not be easier. Really great service from PartSelect--got here faster than I expected. This was a great service--would recommend to everyone!

Parts Used:

Refrigerator Kickplate Grille

Julie from Bronxville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Appliance has Freezer on bottom and Someone dropped Item on handle a broke it

2 Screws on and off

Parts Used:

Freezer Door Handle

David from Valley Grande, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

needed a replacement crisper pan drawer for fridge

The part came the next day, very quick. The wrong size ended up in box we recieved. The part # we ordered was correct, just a mix up in the packaging process. I called and the customer service dept. had a new correct crisper pan delivered to my door two days later. Even with the mix up it was very fast and a good price compared to other sites. I would order again in the future.

Parts Used:

Refrigerator Crisper Pan

Angela from Oconomowoc, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

half of the freezer handle broke off

Not much to describe. Just used philips screwdriver and removed the two screws holding the handle in place. Discarded the broken handle, washed the area where the original handle was and replaced it with a brand new white handle (not yellowed with age)by replacing the two screws.

Parts Used:

Freezer Door Handle

dave from williamsville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator light would not stay on

Removed the 2 screws holding the light bulb shield, then the 4 uolding the metal panel. Unplugged the olw door switch and replaced.
reassembled the pieces.

Parts Used:

Refrigerator Door Switch

Dave from Manchester Center, VT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Noisy damper

Easy fix, it's right in the back of the fridge under a cover that just clips in, a piece of foam, and two screws. The hardest part is getting the clips free without breaking them. After replacement it's silent instead of making a grinding noise regularly.

Parts Used: