AB1924PEKB3 Amana Refrigerator - Instructions

Watched the video. Everything went great, Super simple

installed new parts

removed drsws and shelf put new center rail replaced draws done

I'm a pretty handy person generally but I had to call on my engineer neighbor to help. I've never soldered before so I didn't feel comfortable installing the thermistor. I had everything ready for him so all he did was cut the existing thermistor out, strip the wires on the replacement , solder and tape and he was seriously done in 10 minutes! I replaced everything and plugged the fridge in to find that my fridge still freezes everything. I have now ordered the damper control and gasket to hopefully fix this problem.

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place

A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.

Removed the old handle with screwdriver and replaced the new one in a reverse manner. Very easy to do.

I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.

Although there where no instructions, reading the comments by others made this a really easy replacement.

Remove 2 screws/old handle off and new one on-simple?

Poped ou the old switch, connected new switch and pushed back into socket.

I took the shelf and drawers out and replaced the rail, put the shelf and drawers back in. Easy as pie.

I used a knife blade to slip under the edge of old switch to pray it out of the hole it was inserted into, switched the wires and replaced the new switch into the same hole. It took about five minutes!

I watched your video. The part came faster than expected. The video was very helpful. I am very happy with the service.