All Installation Instructions for Kenmore Range 9119358811

A tenant left the Drip Bowls in an uncleanable state. I could not find a suitable replacement..

Most trainable people can pull out the heating elements and replace the Drip Bowls. The great thing about the ordered drip bowls was that they FIT! Most drip bowls sold as easy replacements for GE or Hotpoint appliances do not fit and wobble the heating element or drip bowls. If not fitting correctly, the tenant usually destroys the heating element and the drip bowl.

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Larry from SACRAMENTO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

burner would not stay heated had to wiggle the burner to make heat

Replaced with the new burner works like new. Thanks a bunch!

Parts Used:

Surface Burner - 8 Inch - 2600W

Marjorie from Swanton, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Burners weren't heating

Unplugged old burner elements. Popped in new burners. Turned on the burners to test.

Parts Used:

Surface Burner - 8 Inch - 2600W

james from killingworth, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

The temperature indicator light on the oven was broken.

I removed the control panel by removing 7 screws and replaced the light indicator and lens.

Parts Used:

Light Lens

Jewel from Nacogdoches, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.

Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect!

Parts Used:

Drip Bowl - 6 Inch

Drip Bowl - 8 Inch

Jennifer from Saginaw, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 25 people found this instruction helpful.

Was this instruction helpful to you?

F2 error code when oven was set at a higher temperature.

I pretty much followed the youtube video posted under the part that I needed. Turned off electricity to that area of the house. Unplugged stove. Took out the old sensor, pushed new sensor cord through the back hole. I did put a small amount of tape,so I could pull it through from the back better. It was impossible to get the clip disconnected in the back and the new clip didn't match up correctly anyway. Ended up having to cut the wires and strip them. I twisted them together and put on the ceramic wire nuts on. Reversed ever thing I did and F3 appeared. Looked that code up on internet. It was from an open or shorted oven. Suggested I check the connections. Pulled stove out again, unscrewed caps on wires and noticed the sensor's wire had another cloth type coating on it. I gentle cut that off, twisted and capped wires again. Plugged in oven, turn on electricity, and tried out stove. Everything is working just fine. Everything took a little longer because this was first time doing this type of repair.

Parts Used:

Oven Sensor

Rachele from OCEANSIDE, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Alarm would sound whenever oven turned on - with an error message code

Watched the video on the PartSelect site. Could not have been an easier repair and I saved the cost of a service call - probably saved at least $100 - $150 in service call and I can only guess what the labor cost would have been. Will use this business again for other appliance repairs on my older stove, washer, etc. By the way - the official Kenmore site said this part was no longer made and unavailable --- Thank you PartSelect for having the part and saving me the cost of buying a new stove!

Parts Used:

Oven Sensor

Carolyn from MASON, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Hinge design is weak: Hinge roller wheel splits; it's been replaced twice in last two years

1. Slide oven door off hinge arms and set aside
2. Slide out oven bottom drawer and set aside
3. Detach springs from perforations in stove rails then hinges and set aside
4. Loosen three screws in each hinge, remove and set aside.
5. Remove hinges, threading them out through openings
6. Thread new hinges into stove openings. Align hinge arms with hinge wheels.
7. Align and tighten three hinge screws in each hinge.
8. Re-attach springs to perforations in hinge, then stove rails
9. Slide oven drawer into stove and door into hinge arms

Parts Used:

Hinge with Roller - Right Side

Hinge with Roller - Left Side

Charles from PORTLAND, OR
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The right side hinge roller broke making the door balky

Lifted the door off the hinges, unhooked the spring from each hinge, unscrewed 3 Phillips head screws from the face plate of each hinge and removed the hinge assemblies . Hinges went in the way they came out; easy shmeasy. Took less than 15 minutes and the door is like new.

Parts Used:

Hinge with Roller - Right Side

Hinge with Roller - Left Side

Phil from BELLEVUE, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

left hinge wheel cracked

REMOVED DOOR TO OVEN
REMOVED HINGE [3 SCREWS]
REMOVED BOTTOM DRAW
UNHOOKED SPRING FROM LEFT SIDE ATTACHED TO HINGE
PULL OUT DEFECTIVE HINGE
REPLACE WITH NEW HINGE AND SCREWS
REHOOK SPRING TO HINGE & REPLACE DOOR
COMPLETE

FOLLOW VIDEO PROVIDED BY PARTS SELECT

Parts Used:

Hinge with Roller - Left Side

Angelo from STATEN ISLAND, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Oven door would not stay open.

Called in and talked to someone and he look yup what he thought was correct but after i got them theywere wrong so i sent them back for a full refund minus 9.90 freight. I still need to figure out what i need for my 27 inch wall oven. Please help. Thanks

Parts Used:

Hinge with Roller - Right Side

Hinge with Roller - Left Side

GARY from BETHANY, MO
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burner wouldn't operate

Took Switch panel off range. Disconnected Infinite switch. Reinstalled infinite switch.. Replaced panel. Repair was very simple and self explainatory.
Knott County Housing Authority Maintenance Personnel

Parts Used:

Range Infinite Heat Switch Kit

Linda from Hindman, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

The larger burners would stop working while in use.

The removal of the old burner and installation of the new burners was easy. Just lift the opposite side that rests on the rim and pull burner out. New burner then gets inserted and the opposite side goes right into rim. It took all of 30 seconds to replace both burners. I wish I had replaced these when they first started to go!!

Parts Used:

Surface Burner - 8 Inch - 2600W