All Installation Instructions for Whirlpool Refrigerator 7WRS22FDBF00

broken drawer

replaced

Parts Used:

Refrigerator Crisper Drawer With Handle

Thomas from North Port, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Door bin was broken

took old bin out replaced with new , two minute job
Parts select is an easy co. to do business with THANKS Andrea

Parts Used:

Refrigerator Door Shelf Bin

Andrea from Cornelius, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Crack in vegetable drawer

Emptied draw of contents pulled draw out and inserted new drawer....easy pea-zee

Parts Used:

Refrigerator Crisper Drawer With Handle

Paul from NAYLOR, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Icemaker Wouldn't Work

I removed the screws that attached the drum housing to the bin. I detached the auger & removed the broken drum assembly, turning the auger to the right, opposite what I thought it should be. I slipped the end of the auger into the new bin coupler & put it in place at the rear of the bin. Next I slipped the auger drum into place & tightened it to the left with a socket wrench. I screwed the drum housing to the bin, put the bin back into the freezer & I now have ice through the door again. Easy repair even for me, a 60+ woman.

Parts Used:

COUPLING

Refrigerator Ice Bin Auger Drum

NANCY from KEOKUK, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

7 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Reset rater filter

Hold both water filter reset touch sensors down together. This will reset the water sensor indicator.

Parts Used:

Refrigerator Ice and Water Filter

Andre from GRAND RAPIDS, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

I had a broken door bin

Nothing to do, part came, fully assembled, it just went right into the door. Yea!!!

Parts Used:

Refrigerator Door Shelf Bin

Lorraine from Brush Prairie, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Door bin broke

Ordered the replacement part, came in 2 days, opened the box,rinse and dried it and put in the door. Nothing to it.

Parts Used:

Refrigerator Door Shelf Bin

Ginger from Danville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

freezer light out...Fridge light dim

Previously replaced the Fridge light (control board).. The Fridge and Freezer lights were flickering rapidly...LIghts worked fine for four months...then the freezer light went out completely and the fridge light went dim. I unplugged the freezer light and all lights went out! Hooked it back up and ordered new freezer light. After replacing freezer light all three lights work perfectly at full intensity problem solved...For now!

Parts Used:

LED Light

Scott from CAMBRIDGE, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

flashing lights

using a flat blade tool removed old main light board and installed new light board, light now works fine.

Parts Used:

LED Light Control Board

Carlos from CHICAGO, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Lights Flashing / Strobes

easy peezy - removed old light/module and installed new one works great.

Parts Used:

LED Light Control Board

Darryl from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

water leaked when the paddel was pushed

Followed the video on parts page. I was worried I would brake the cover but learned from the video the right way to remove the front plate. I found the video very informing. Thank you for saving me a service call and the part cost was minimal compared to a new refrigerator .

Parts Used:

Water Tube Kit

Monica from EDMOND, OK
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Broken ice auger drum

Dismantled the ice bin, and then the ice crusher. I then replaced the auger drum and reversed the dismantle.
I now have crushed ice once again, just like new.
The blow up schematics help isolate the parts needed beautifully. Just like a jobber would expect.
Thanks Guys,

Parts Used:

Refrigerator Door Shelf Bin

Refrigerator Ice Bin Auger Drum

Tracy from Glenpool, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker just stpooed making ice

The troubleshooting time takes about 20 to 30 minutes. After checking out the solenoid (valve water), the water line, and the electronic board (emitter/receiver) are working fine. The only thing left is the ice module. I called Partselect and talked to a sale rep to make sure I get the right part, and the lady was so helpful by sendind the picture of the part so I can review before ordering it. I received the part in 3 days ( normal shipping) and did the folowings:
1) Unplugged the power cord from refrigerator.
2) Removed the ice module by removed a 1/4" screw from under the right side of the icemaker that retains the icemaker and a “U” plastic clamp and then pull out the whole unit it from the track.
3) Unplugged the cable connected to the ice maker.
4) Using the phillips screw driver to remove the 3 screws. Carefully pulled out the ice module and installed the new ice module.
5) Put the ice maker back to the freezer, plug the cable back to the ice maker and put the clamp and tighten the nut.
6) Plugged the power cable back to the wall.

The first ice I got in an hour and a full bucket of ice in less than 24 hours. I spent less than $80 for the whole thing. Thank you so much Partselect for the great service and the stories posted, it really helped me to get it done.

Parts Used: