All Installation Instructions for Kenmore Range 79070502010

Gasket In Door Replaced

The gasket just snapped in place. The first one I ordered was, my fault, the wrong one and I returned it and got the correct one two days later.

Parts Used:

Oven Door Seal with Clips

James from Greenville, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

55 yr old wall oven had burnt out seal

Very easy--just had to drill new holes for the clips because the are already pre set in the rubber gasket

Parts Used:

Oven Door Seal with Clips

Diane from Natrona Heights, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Replacing the Oven Door Vent Trim

1. Remove the old Trim by opening the door and unscrewing the two top screws holding the trim and glass to the door. 2. Lift the trim piece off of the glass, being careful as the glass will be a bit loose, and unscrew the handle from the trim piece, discard those two screws. 3. Place the new trim piece on the glass so that it fits snugly. 4. Place the screws back through the holes on the inside of the door, through the new trim piece and attach them to the handle. 5. Tighten down snugly and close door. You are done!

Parts Used:

Oven Door Vent Trim

daniel from fargo, ND
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

self clean process changes the color of the trim

I checked the internet and found PartSelect.com the most affordable (lowest price) for the part. I got the part within 3 days which was very quick. Replacing was unscrew and re-screw at two points. it took me about 15 minutes (including opening the box and talking to my wife on the phone for 5 minutes).

Parts Used:

Oven Door Vent Trim