All Installation Instructions for Whirlpool Refrigerator 5WRS25FDBF02

Leaking water tube connector/union

Received the union I ordered, then discovered that the tubes were different sizes, so I had the wrong part. I had read elsewhere that it was necessary to trim the two ends of the tubes with a box cutter to stop the leaks - I did this, and the leaking stopped. I was then able to go to a local hardware store and get a 5/16 to 1/4 union and replace it. The leaking is stopped, and the water supply in the door is now working like new. No problem with partselect, but I did buy a caliper so that I can check tube diameters if I ever have a similar problem! This is a great site to find instructions - well worth the time to search!

Parts Used:

Refrigerator Water Tube Connector/Union 5/16 To 5/16

Roderick from NEWTOWN, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Broken tray

Remove old tray, replace with new tray.

Simple & easy.

Best part is I ordered on Monday & received on Tuesday!

Parts Used:

Refrigerator Crisper Drawer with Humidity Control

Brian from Los Angeles, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 15 people found this instruction helpful.

Was this instruction helpful to you?

There was no light on in refrig area

Just replaced the switch, but unfortunately that was not the problem; nor was it the bulb....so I am back to square one.
But Parts Select is a great place to order from. Thank you.

Parts Used:

Refrigerator Door Switch

Lori from Chuluota, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

12 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Both parts were broken and required replacement.

The broken part was removed and new part installed without any trouble.

Parts Used:

Refrigerator Crisper Drawer with Humidity Control

Refrigerator Dairy Compartment Door

Patricia from Inglewood, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

12 of 19 people found this instruction helpful.

Was this instruction helpful to you?

The refrigerator display said I need to replace the filter.

When the filter arrived, I removed it from the package.
Upon reading the instructions, I removed the old filter.
When I removed the old filter I NOTICED HOW IT CAME
OUT SO THAT I COULD HOLD THE NEW FILTER IN
THE SAME POSITION AND REPLACED IT WITH THE
NEW IN THE SAME POSITION. When I closed the cover
door, I went to the display panel and reset water filter display.

Parts Used:

Refrigerator Ice and Water Filter

ronald from SEVERNA PARK, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 19 people found this instruction helpful.

Was this instruction helpful to you?

The shelf runner broke

Took out the old one and put in the new one. No tolls required. It did give me the opportunity to clean the back wall of the refrigerator.

Parts Used:

Crisper Cover with Glass

Andrew F from Media, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

My drawer had been broken and I needed a new one.

When I took the pan out of the box, it was not the exact same as the one I had. But it fit perfect. The only hard part was the fact that it looked so good I had to clean the entire fridge side. (Smile)

Parts Used:

Refrigerator Crisper Drawer With Handle

Jennifer from Birmingham, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Broken Crisper Frame And Pan

Jus took me seconds to replace both items. No problem.

Parts Used:

Crisper Cover with Glass

Refrigerator Crisper Drawer with Humidity Control

Mauricio from National City, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Replacing the water filter.

Lift up on the water filter door to open. Pull out the old filter while noticing the arrow pointing up on the filter. Pull off the green caps on the new filter and pop the new filter in with the arrow pointing up as on the old filter. Push in until the filter snaps into place. Close the filter door. Push reset on the water filter button on the freezer door to reset. Very easy!

Parts Used:

Refrigerator Ice and Water Filter

Sandra from Altoona, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Replaced broken parts

Replacing the broken parts for my Whirlpool refrigerator was very easy and the price was reasonable.

Parts Used:

Refrigerator Slide-Out Shelf with Glass

Snack Pan - Clear

Refrigerator Crisper Drawer with Humidity Control

Pearlie from FLORISSANT, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

7 of 7 people found this instruction helpful.

Was this instruction helpful to you?

35 year old water tube became brittle and cracked; leaking water

Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.

Parts Used:

Water Tube Kit

Melvin from OPELIKA, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Water ?? filter needed to be replaced

Simple, turn and pull to remove. Push and turn to install.

Parts Used:

Refrigerator Ice and Water Filter

Victor T from CORDOVA, TN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

9 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Chrisper pan support cracked due to overfilling

removed old shelf support after taking out the glass and support. New part was a perfect fit that was a "shap: to put in.

Parts Used:

Crisper Cover with Glass

David from Lenexa, KS
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

9 of 13 people found this instruction helpful.

Was this instruction helpful to you?

light not working in fridge

It was so easy!

Thanks for the rush to my home on the part.

I just unscrewed the plate that locks in the light switch (screwdriver) and unplugged the old faulty part and plugged in the new switch, screwed the cover back on and I was done!

Easy!

And I am not Mr. Fix-it!

Parts Used:

Refrigerator Door Switch