All Installation Instructions for Whirlpool Refrigerator 5VGI6FARAF01

Light hinge broke

Repair was tremendously easy. All I did was remove old light switch by prying out with screw driver and plugging in the new light switch and pushing it into the hole. Simple! The instructions weren't needed, but they were very thorough.

Parts Used:

Door Switch

Justin from Huntersville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Needed to replace pivot block (broke) so frig door extension could close

Can not do repair. Ordered part 3/30 due to me on 4/1. Today is 4/15 and still no part. I even paid for quicker delivery. Thanks FedEx!!

Parts Used:

Refrigerator Pivot Block

Daniel from CENTREVILLE, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

shelf was warn from sliding pans into the fridge

used the knife to loosen the back edge of the shelf and lift. Then pulled the front edge toward me, removing the part. Didn't even take food out. then I cleansed the area. Installing the part was the easiest process. I pushed the front of the part onto the front lip and snapped the rear edge down on the rear lip.........DONE

Parts Used:

Refrigerator Shelf Trim (White)

STEVEN from OMAHA, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

filter needed to be changed

followthe instructions in the book that came with the refrigerator

Parts Used:

Refrigerator Water Filter

ALICE from SPRING HILL, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator lamp not functioning

Had to push the light switch to get lamp to light up.
Removed power from refrig. and removed old light switch
and replaced with the one I got from Partselect. Turned power back on and was done.

Parts Used:

Door Switch

RALPH from PARAMUS, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken light switch

Pried out the old switch and installed the new switch.

Parts Used:

Door Switch

James from Shrewsbury, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Brand new refrigerator door switch for the light broke

The part needed was not available to me so I had to request a service call ... the service tech came out after a week long wait and did not have the switch ... he had to order it which added another 2 week delay to this very simple repair.

Parts Used:

SHELF-GLAS

Ronald from MURFREESBORO, TN
Difficulty Level:
Very Easy
Total Repair Time:
More than 2 hours

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

icemaker

installed new parts

Parts Used:

Door Switch

Harold from Lindenhurst, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

ice maker not working

replaced ice and water filter

Parts Used:

Refrigerator Water Filter

Myrna from Port Carbon, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Broken refrigerator compartment light switch.

The best part of the repair was how easy it was to find and order the part. Instead of searching the parts houses around town I just went to the PartSelect web site, quickly found and ordered the part in about five minutes, received the part the next day at my home and was ready to make the repair. Wow! What a pleasure for something to work the way it was meant to. Removed old switch located by prying out with sharp knife or screwdriver. Don't worry about breaking it or cracking plastic. Disconnect(unplug) wires from back of switch. Replace (plug-in) wires on back of new switch. Insert in location of old switch. Finisheed.

Parts Used:

Door Switch

Jack from Topsail Beach, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Needed part to help fridge doors close.

Used a philips screwdriver.

Parts Used:

Refrigerator Pivot Block

Jan from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

It was time to change the filter for the first time

Opened up the door that covered the filter, unscrewed it and put the new one in and closed the door back up.

Parts Used:

Refrigerator Water Filter

Elizabeth from Greencastle, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Light switch broken

I used a knife blade to slip under the edge of old switch to pray it out of the hole it was inserted into, switched the wires and replaced the new switch into the same hole. It took about five minutes!

Parts Used:

Door Switch