All Installation Instructions for Kenmore Washer Dryer Combo 41761723510

Tumbler not moving

Removed back panel. Popped off top of dryer, then removed front of dryer. Slid belt onto tumbler, put front cover back on, put top back on and adjusted belt frombottom panel cover.

Parts Used:

Drum Belt

Francis from Middletown, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Broken belt

Watched video sent to me after I purchased belt on line. Super helpful!

Parts Used:

Drum Belt

Sharon from UXBRIDGE, MA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Dryer not heating

Very slowly and carefully, you tube videos and schematic very helpful.

Parts Used:

Control Thermistor

Robert from Olmsted, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Dryer drum stopped spinning

First I took the drum out of the dryer. This was an easy tear down. I had to remember 2 wires, and a belt assembly ( 2 pullies ). I removed 3 screws inside the drum to release the bearing assembly from the back. Then I went to the dryer chasis and removed the mounting bracket by removing 2 screws. I simply replaced the mounting bracket with the new one. This required having to use a magnet to hold a small ball bearing in place while I worked the rest of the pieces in position.I greased it up and went back to the drum. I replaced the old bearing assembly with the new one. Easy. I took the time to shop-vac the inside of the dryer. There was a lot of loose lint, candy rappers, coins, etc. Finally, I put it back together. Unfortunately, this is the forth (4th) time I've had to do this. It's cheaper than buying a new dryer. Now, I've got to fix the washer.

Parts Used:

Rear Drum Bearing Kit

Ron from Senatobia, MS
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Just popped the part I ordered right in and it's was closing in no time !

Just opened package and popped the part right in!

Parts Used:

Door Catch

Debra from BROOKLYN, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

strike broken

popped in one in

Parts Used:

Door Strike

Linda from Batesburg, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

7 of 19 people found this instruction helpful.

Was this instruction helpful to you?

bearing went out

took apart and replaced parts easy to do but no one in my town can get me parts. thay want 100.00 gust to come out and look at it so found parts online and thats that

Parts Used:

Rear Drum Bearing Kit

james from tahlequah, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Top hinge on clothes dryer separated, leaving door difficult to open/close

Ordered part from partselect.com. Part was back ordered; however they were very proactive in communicating status updates! When it arrived it was simply a matter of removing door using a philips screwdriver, installing the new hinge and presto - job complete! Kudos to partselect.com ??

Parts Used:

Door Hinge

Robert from CUMMING, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Damaged Filter

Took out the damaged lint filter and replaced with new one.

Parts Used:

Dryer Lint Screen

Omar from Rumford, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

lint screen had holes

took out the old one and put in the new one

Parts Used:

Dryer Lint Screen

Carol from COLUMBUS, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

LINT FILTER

JUST DROP IT IN WOOOOLA

Parts Used:

Dryer Lint Screen

ANGEL from MIAMI, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Dryer lint filter was all torn up after 12 years of use.

Simple: I ordered the part from you then took out the old old and inserted the new one. Took all of 1 minutes

Parts Used:

Dryer Lint Screen

Michael from DUNN, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Squeaking

Watched Video Provided. Very Simple Repair. Asked my lovely wife to hold drum in place while replacing drive belt. She gladly complied and is back doing what she seems to love most. And no, I'm not kidding. Our washer and dryer seem to run 24/7/365. I've completed various repairs on both appliances over the last couple of years and saved 100's of dollars thanks to this site .

Parts Used:

Rear Drum Bearing Kit

David from PORT CLINTON, OH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

dryer was squealing loadly

took off face of dryer, removed drum 4 screws removed two srews holding bearing and shaft ,replaced shaft bearing and shaft . Just for preventive maintenance i replaced idleling arm and dryer belt. I lined everything up replaced drum used shop vac to clean lint and dust from all parts replaced face of dryer and boom i got a btand new dryer

Parts Used: