2VED21ZKFN00 Whirlpool Refrigerator - Instructions

Saw online info video explaining the possible cause and how to fix it. Ordered upper closing cam. Removed top hinge cover and hinge, removed door set it on a table. Removed old cam installed new cam tightened the retaining bolt put the door back on aligned it with freezer door and bolted it down snug. No more noise and it took less the half and hour.

Remove replace door with new cams.

Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done

Pull the broken end caps out and snap the new ones into place. Very easy repair.

Watched the video and it was very easy!! My daughter and I replaced BOTH CAM PIECES in less than 30 mins. Working like new!

Remove top henge, lift door off bottom henge, take off old plastic closer put on new one. Door works great now

Turn fridge off. Removed top hinge cover. Removed three screws in top hinge. Lifted hinge from door. Lifted door off bottom hinge. Place door on level surface and removed old cam with socket set. Installed new cam. Removed old cam from bottom hinge with socket set. Installed new cam. Cleaned bottom of door while had easy access. Placed door back on bottom hinge. Install top hinge and screws. Finished.

We thought we were in need of a new seal around the door but as my husband checked the door he found out it was a piece under the door that holds it up so the door was not sealing right when it closed. I went on line. Found this site and found my fridge. My husband viewed the pics of the parts and figured out we needed a cam. I ordered my part and could not believe it came the very next day!!! I didn't even pay for anything other then regular delivery. He took off the door and it was simple to just slip on the new part and replace and put the door back on.. Nothing much to tell here. Less then 30 minutes. Thank you so much for the quick service getting it out to us. I was about to put a child lock on the door just to keep it closed..

I removed the items from inside the door and removed the door from the refrigerator at the upper hinge. Removed cam from the door and replaced with the new one. Checked for proper operation and it's quiet as a mouse. I love it.

I tipped the refrigerator back and my friend used an adjustable wrench to attach put the new wheel assembies on. I also used a socket wrench to get the old attacheement bolts to thread. I rolled the cleaned appliance in place and adjusted the wheels with the socket set for easy door closing. It went smoothly.

Removed the door, laid the door on its side, and pulled the worn part from the door. Inserted the new part, reattached the door, and it works like a charm. The parts diagram online was very helpful. I ended up purchasing a part I didn't need in case an unidentified washer came with it, but I didn't need it. No big deal.

supported the door on blocks. removed old parts with a socket and ratchet. the new parts didn't line up quite right, so some modification with a dremel was necessary. otherwise, the repair was very simple.

pulled top hinge pin off with 5/16 nut driver ,lifted door off and was able to see both parts and replaced them just like they were,easy fix

Opening up the Evaporator Fan section was a quick and easy job. After opening, I checked and removed the fan and looked at the grommet. The grommet on the fan was tight and secure and I could no longer hear the noise. I closed the opening. Something I had done while checking the fan grommet must have solved the problem. I have not hear the noise again!

Removed all the adjustable shelves inside the door. Removed the top hinge cover (1 nut). then the top hinge bracket (3 nuts). The door doesn't weight very much so you shouldn't have to worry about the door just falling off after you remove the top hinge. then simply lift the door off the bottom hinge and carefully lay it down. One nut in each of the plastc cams on the bottom of the door and an easy swap out with the new parts. A little vaseline one at least one of the surfaces of the cam, reverse the order and simply put things back together and your good to go. Door closes on its own like new. You might as well get both parts for the lower cam and swap them out simultaniously since you have the door off. PLEAS NOTE: Yes there are two different parts for this repair.