All Installation Instructions for Kenmore Refrigerator 25360419617

refer door hinges were lost during the move in to our first home.

The center door hinge was still attached to the refridgerator so I only had to install the bottom and top hinges. I also moved the door handles to the other side so the doors open the "right" way. The hinges were just 2 bolts and 3 screws. Now, just if the repair man from our home warrentee company would show up to fix the refridgerator. It's blowing hot air!!!

Parts Used:

Lower Hinge Bracket

Single Washer

Lower Hinge Pin

Upper Hinge

edith from woodbridge, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

10 of 24 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator

took back cover off in freezer replaced fan motor put cover back works fine

Parts Used:

Evaporator Fan Motor

fred from WICHITA, KS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Fridge was cooling down enough the heating defrost was bad

I take 2 crew on front of the fridge take the cover and fan out replaced the part and put everything back it’s a easy job thanks guys for the parts from Orlando fl

Parts Used:

Defrost Heater

José from ORLANDO, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The original part was plastic/and broke

unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!

Parts Used:

Upper Hinge

John from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Had to replace broken crisper shelf frame & broken door shelves

Removed broken parts and snapped in new parts No tools required.

Parts Used:

Crisper Cover Frame - No Glass

Door Shelf Retainer Bar

Outer Banks Realty from Waves, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Accidentally broke the glass insert.

Simply slide the new glass insert in!

Parts Used:

Crisper Glass Shelf Insert

DAVID from SAN FRANCISCO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The door shelf retainer bars cracked.

The repair was quick and easy. I simply removed the old/cracked door shelf retainer bars and snapped the new ones into place.

Parts Used:

Door Shelf Retainer Bar

Deidre from FONTANA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Repaired Oven Range Light Bulb

The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.

Parts Used:

Light Bulb

Alan from SAN MATEO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

broken glass on top of crispers

Since the glass was broken and gone I just had to slide the new glass on top of the crispers. This was not really a repair, just an exchange of new for the old.

Parts Used:

Crisper Glass Shelf Insert

Teresa from SOUTHFIELD, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Front upper edge of crisperpan was broken

Slid out old, broken pan and slid in new replacement pan.

Parts Used:

Refrigerator Crisper Pan

Richard from DAYTON, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

None

Real easy took out the broken ones and replaced with the new ones.

Parts Used:

Refrigerator Crisper Pan

Edward from DUMAS, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Door retainer bars were broken

Pushed down on bar slots

Parts Used:

Door Shelf Retainer Bar

Sheryl from TOMPKINSVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Fridge parts missing

I moved into a house with two guys that would have never even thought of fixing the problem. I'm a girl and couldn't live with a fridge without all it's parts so I looked in other places and decided to buy from here because of the reviews. I got the parts in two days with no problems at all, they were easy to install and the fridge looks better and we can make better use of the space.
I would recommend this store to anyone!!

Parts Used:

Dairy Door - Clear

Door Shelf Retainer Bar

Paulina from Hallandale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.

The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.

If your fan is still on the shaft, simply push it off and extract it the same way. Then place the new one on the shaft.

In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.

Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.

Hope this helps someone. :)

Parts Used: