All Installation Instructions for Kenmore Refrigerator 25360302411

Replacing a freezer door rack

It was a perfect fit and snapped into place in seconds. No instructions were required.

Parts Used:

James M from Charlotte, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

light socket burned out

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

Parts Used:

Light Socket

Judith from Gambier, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken fan blade ,I forgot to unpluge before cleaning

I did it just like the video it was that easy! love this web site amazing!

Parts Used:

Fan Blade

Melissa from Anderson, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Fan would stop or turn slowly. outside of refridg hot

took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Rusty from Howell, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

Rattling Noise from behind frig

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Michael from Rockford, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

Was this instruction helpful to you?

Refrigerator door sagged, had to push the door to close it.

Used wood blocks to raise the door off the lower hinge bracket then unscrewed the suspect hinge. Cut a small shim, two layers of soda can, to place under the lower edge of the new hinge bracket and doubled the washers by using the old one to ensure I had adequate clearance for the door. After a little silicone lube I installed the new hinge bracket. All better now.

Parts Used:

Single Washer

Lower Hinge Bracket

Michael Jude from Saint Martinville, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

while cleaning the condenserI accidentally hit the fan blade and broke it

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

Parts Used:

Fan Blade

james from vandergrift, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

broke fan blade while trying to remove dust.

Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.

Parts Used:

Refrigerator Condenser Fan Motor Kit

Jack from Kiefer, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

Original plastic hinge cracked across the middle

Removed 2 hex screws & old hinge, placed new hinge on cabinet & found that it didn't fit; one hole was about 1/8" off. Had to drill a new hole in cabinet top in order to attach new hinge. Hinge works fine now. I'm glad to find the hinge is metal; original one was plastic.

Parts Used:

Upper Hinge

Al from Sarver, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

top door rack was broken at the connectors

The new part fit perfectly! I just snapped it on! Thanks so much Partselect! You processed my order quickly, and I had it in my hands in a few days. What a relief to have this fixed! Thanks again.

Parts Used: