Models > 25360082410 > Instructions

25360082410 Kenmore Refrigerator - Instructions

All Instructions for the 25360082410
121 - 135 of 159
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trim piece on shelf was broken
Just had to slide new part on to the back of glass shelf.
Parts Used:
Shelf Trim - Rear
  • Sherrye from Trezevant, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer door sagging due to warped hinge
Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.
Parts Used:
Upper Hinge
  • Keith from Springfield, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken crisper tray
Removed old tray and slid in the new ones
Parts Used:
Crisper Drawer
  • robert from edison, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf retaining rail
It took less time to change out the rail than it did to take all the items off the shelf. Literally. Old rail holds on to the door with two snap in notches. I was able to easily unsnap the two ends of the broken rail and snap in the new rail in less than 30 seconds. No tools or mechanical knowledge needed.
Parts Used:
Door Shelf Retainer Bar
  • Brian from Sterling, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken retainer bar
super easy snaps Into place in a matter of seconds I wish I would have done it a long time ago
Parts Used:
Door Shelf Retainer Bar Door Shelf Retainer Bar
  • christina from norman, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old gasket was torn causing excessive moisture in refrigerator.
Removed door, removed old gasket, cleaned surfaces where gasket sealed, replaced gasket, re-installed door. About 10-15 min.
Parts Used:
Refrigerator Door Gasket
  • Joseph from Cape Coral, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Broke Pan Cover Glass Insert
It slips right on. The hardest was getrthe item unpacked. It was pacrvery well for shipment so it wouldn't get broken. This company has very nice customer service on the phone.
Parts Used:
Pan Cover Glass Insert
  • Sheila M from Rosadale, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
both retainer bars broke within the first year..
The new ones popped right in no problems
Parts Used:
Door Shelf Retainer Bar Door Shelf Retainer Bar
  • George from Highland, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The freezer door shelf retainer bar was broken
1.) Removed the old broken freezer door retainer bar. 2.) Removed the new freezer door retainer bar from shipping carton. 3.) Inserted new freezer retainer bar into place. 4.)Done is less than 4 minutes.
Parts Used:
Freezer Door Shelf Retainer Bar
  • Charles from Dimmitt, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Shelf was broken
Clicked in beautifully....no problems at all.
Parts Used:
Door Shelf Retainer Bar
  • Gay from Carlsbad, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bROKE THE DOOR RACKS IN HALF
Just popped the broken one off and popped in the new one
Parts Used:
Door Shelf Retainer Bar
  • Andres from Calistoga, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper cover glass broke.
A no brainer, just unpacked and placed on top of crisper!
Parts Used:
Pan Cover Glass Insert
  • Eileen from Ledyard, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken door shelf retainer bar
Popped out the broken bar and popped in the new one. Took about a minute-very easy.
Parts Used:
Door Shelf Retainer Bar
  • Ann from Tallassee, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced kick plate
it was very simple , it just pressed right into place i was very impressed
Parts Used:
Kickplate Grille
  • Richard D. from Sedalai, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The glass over the crisper shattered while it was being cleaned
Just laid the new glass onto crisper bins.
Parts Used:
Pan Cover Glass Insert
  • Keven from East Aurora, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 25360082410
121 - 135 of 159