All Installation Instructions for Kenmore Refrigerator 10641153211

freezer light out...Fridge light dim

Previously replaced the Fridge light (control board).. The Fridge and Freezer lights were flickering rapidly...LIghts worked fine for four months...then the freezer light went out completely and the fridge light went dim. I unplugged the freezer light and all lights went out! Hooked it back up and ordered new freezer light. After replacing freezer light all three lights work perfectly at full intensity problem solved...For now!

Parts Used:

LED Light

Scott from CAMBRIDGE, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

crisper drawer side slide broke off

bought a new crisper drawer

Parts Used:

Refrigerator Crisper Drawer with Humidity Control

Ramon from LAWRENCE, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Lights Flashing / Strobes

easy peezy - removed old light/module and installed new one works great.

Parts Used:

LED Light Control Board

Darryl from JACKSONVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

shelves and drawer were cracked.

put new ones in place.

Parts Used:

Refrigerator Slide-Out Shelf with Glass

Refrigerator Crisper Drawer With Handle

Refrigerator Shelf Glass

Crisper Cover with Glass

Esther M from NEW IBERIA, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Old drawer - plastic cracked, and would not run along rails

First, imagine the frustration - I want an apple.... can barely open the drawer. Need carrots - the struggle. Celery? Wondering if I can do without..... the drawer's plastic has broken along where it slides along the guide rails, and it was a pain to open and close the drawer. First, as is my custom I went to Amazon, but couldn't find the part. There, however, I read a useful customer review that told me how to find the correct item, so I did that, input the part number into google, and VOILA - I got to this website. Excitedly, I input my credit card information and waited with eager anticipation (and a bit of trepidation - would it be the correct size?) for the drawer to arrive. A short time later, I found a large box at my front door. With joy, I took some scissors and opened the box, and then carefully used the scissors to cut the binding strap that was holding the protective cardboard wrap. My new drawer!! I gave it a quick clean, and then opened my fridge door all the way (this is an important step). I pulled out the old, broken drawer, and carefully inserted the new. It fit perfectly!! This took about 15 seconds. I then took those apples, carrots, and celery (and a pomegranate and some lettuce) from the old, broken drawer and placed them tenderly into the new drawer. I slid the drawer closed, and then shut the fridge door. Mission accomplished! Last step was to throw the old broken drawer into the garbage - this was a very simple process as well.

Parts Used:

Refrigerator Crisper Drawer with Humidity Control

Ariel from HOUSTON, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

The Switch Broke...Absolutely Fell Apart.

I simply removed the old switch using 2 small screwdrivers and the old switch case popped out. I then upluged the wires from the old switch and reversed the process. Didn't take longer than 5 minutes begining to end! Thank you for the great service! Duncan quaid

Parts Used:

Refrigerator Door Switch

Duncan from Metairie, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Crisper drawer tilted to the right when pulled out

The repair consisted of lifting up the drawer cover and replacing it. Why the 60 minutes to do that? It took 58 minutes to clean the refrigerator.

Parts Used:

Crisper Cover with Glass

William from Heathsville, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Raise side of fridge and slide 2x4 under side with broken wheel.

Remove back side cardboard access cover. About 6 dcrews need to be removed. Remove 9/16” bolt and lower compressor tray frame down to slide out wheel axel. Place wheel in slot and replace axel. Lift compressor tray and replace 9/16” bolt. Replace cardboard cover. Remove 2x4.

Parts Used:

Cab Roller

Hans from OGDEN, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Plastic side-rail cracked. Shelf could no longer support weight on top or in the drawer beneath.

(1) Remove the drawer by pulling it open until it catches. Push up gently on the bottom-rear of the drawer to lift it over the stop tabs in the drawer rail, and pull the drawer out completely. Note: You will need to push the refrigerator door gently to the fully open position to remove the drawer all the way. The door will open about 30 degrees further than where it comes to rest on its own when opened.
(2) Remove the shelf by lifting gently on the front and sliding it forward. Once the rear corners of the shelf are beyond the upper lip of the shelf rail, you can lift the shelf out of the rail, and turn it vertical to remove through the fridge door. Note: the glass in the shelf is meant to stay in, but if its old or damaged it may tip out when you turn the shelf on its side. So you may want to tape it in place before removing the shelf.
(3) Install the new shelf by repeating step 2 in reverse.
(4) Reinstall the drawer by repeating step 1 in reverse.

Parts Used:

Refrigerator Shelf Frame with Glass

J from BOSTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

broken shelf

easy -- removed broken shelves and replaced with new ones

Parts Used:

Refrigerator Slide-Out Shelf with Glass

Allan from LAVONIA, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator light would not stay on

Removed the 2 screws holding the light bulb shield, then the 4 uolding the metal panel. Unplugged the olw door switch and replaced.
reassembled the pieces.

Parts Used:

Refrigerator Door Switch

Dave from Manchester Center, VT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Refrigerator door not self closing

Emptied door of food jars etc. Used socked on top plate. Removed door and placed on a flat surface. Used socket to take out cam on the bottom of the door. Replaced worn cam. Replaced nylon sleeve on the top of the refrigerator door with needle nose pliers. Placed door in the bootom slot with the new cam in place. Placed top plate in the new nylon sleeve on the door. Replaced screws with socket wrench.

Parts Used: