Magic Chef Cooktop Parts

This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

This top burner igniter comes with a mounting bracket.

This cooktop cleaner will cut through tough grease and baked-on residue. The cleaner will leave a protective coating of silicone on the cooktop surface as it cleans. This 10oz bottle is safe for all glass, porcelain, and ceramic cooktops. Just apply a small amount to your cooktop and use a circular motion by using a sponge or a rag and gently press until the grease or baked residue has been removed. Please remember to wear gloves to protect your hands while working with the cooktop cleaner.

The manufacturer suggests replacing the receptacle at the same time.

This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.

Sold individually.

This surface burner switch, also known as an infinite switch, is a key electrical component that controls the heat output of your stovetop burners. When you turn the control knob, the switch adjusts the power level to the burner, allowing for precise temperature regulation during cooking. If your burner is not heating properly, overheating, or stuck at a fixed temperature, the switch may be faulty and should be replaced. This part is compatible with a variety of ranges, wall ovens, and cooktops, and is sold individually without additional hardware. Installation requires a screwdriver, pliers, and a wiring diagram. Be sure to disconnect the appliance from the power source before beginning. To replace, remove the control knobs and access the underside of the control panel, then disconnect the old switch and wiring before securing the new one in place.

This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.