Maytag/Maytag_Thumb/48385.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Burner Head Cap with Spark Electrode

★★★★★
★★★★★
2 Reviews
$67.81   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741732
Manufacturer Part Number WP3412D024-09
Manufactured by Whirlpool
Product Description

Burner Head Cap with Spark Electrode Specifications

This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Gas smell
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Magic Chef, Maytag, Admiral, Crosley.
Part# WP3412D024-09 replaces these:
AP6008592, 12500050, 3412D007-00, 3412D007-09, 3412D014-09, 3412D015-09, 3412D016-09, 3412D017-09, 3412D018-09, 3412D024-09, 74003963, WP3412D024-09VP
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Carl
    October 31, 2017
    Gas leaks out from base of burner, burning uneven pattern
    For model number mgr5751bds
    Hi Carl, Thank you for the question. It sounds like the seal under the burner head has a leak. They no longer make the burner heads with the seal.The burner head part has been updated and the gasket seal is no longer required.The seals are no longer made so you will need to replace the burner heads with the new design. Hope this helps!

    7 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Casey
    January 22, 2019
    This model range has three 9200 btu/hr burners and one 12000 btu/hr burner. Does the 3412d024-09 burner operate correctly in both locations? If not, what part number is used for the high heat burner replacement?
    For model number Maytag mgr5710adw
    Hello Casey, thank you for your question. The Part Number: PS11741733 is the only replacement burner listed as a compatible replacement for your unit. This would be used in all 4 spots on the cooktop. I hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    John
    November 3, 2017
    Where should the clamp be bottom of burner near the top or where ? Closing the openning it seems to be for the air to the burner
    For model number MGR4452BDB
    Hi John, Thank you for your inquiry. There is a video on our website that you can reference on how to install the burner head. You will find the video under part number PS11741733. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Marion
    June 13, 2019
    My high intensity burner has Flame coming up from cooktop. I tried to buy replacement gasket but it is no longer used. Can i get a new high intensity burner and will it solve my problem.
    For model number CHG9800BAM
    Hello Marion, Thank you for the question. The Burner head has been updated and the gasket seal is no longer required. So replacing the burner head should fix the issue. Thank you for your inquiry, good luck with this repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Orlando
    February 9, 2020
    What is the difference between 3412d024-09 vs 3412d025-09? Are they interchangeable?
    For model number MGR4450BDQ
    Hello Orlando, Thank you for your question. The difference is the shafts that connect them to the burners have a slightly different alignment to attach to your stove. The compatible burner cap is the one under part PS11741734 for your model. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Betsy
    August 14, 2019
    2 of the burner heads don't work, the other two have uneven flames coming out. Is it worth replacing these on this Magic Chef model, several years old (?) are there replacement parts that would work with this oven/range?
    For model number 34MN-3TKXW-ON
    Hello Betsy, thank you for contacting us. Replacing the Spark Ignition Module Kit part number PS2003170 for your model will most likely fix this. Good luck with your repair!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.1 / 5.0, 8 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Oven not working
        There were no flames when I turned the oven on, so the first thing I did was narrow down the problem through the process of elimination. It was really a fairly simple system to work on. I verified that it was getting power to the hot surface igniter (which it was). You can check this visibly by seeing if it heats up and glows, but that is not enough. You also have to make sure the igniter is drawing enough amps to open the oven safety valve ( about 3-3.5 amps). You do this by leaving everything connected and turning the oven on as normal. You clamp the Amp Meter (a clamp style Amp Meter works best)to the wires going into the Hot Surface Igniter and checking amperage. If the amperage is to low then the igniter is not pulling enough to open the valve and you should replace it. If the amperage is as it should be then the valve is not opening. The next thing is to turn off the gas to the appliance and unplug the electricity before starting any other work. I removed the oven racks and bottom decking out of the way so I would have room to work. I removed the oven burner to get to the oven safety valve, which is held in by two screws. I disconnected the gas line coming in to the valve using an adjustable wrench, removed the two wires (noting their position) and removed the two screws with a phillips head screwdriver. I replaced the valve with a new one and hooked everything back up in reverse order. That was all there was to it. I also replaced a couple of burners on the top of the stove while I was at it, only because they were difficult to light sometimes. They simply twist out counterclockwise and have two wires that you can't get confused because they have different size connectors and will only go on one way. This 10 year old stove now works like a new one.
        • JEREMY from ARLINGTON, TN
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP3412D024-09, WP74002387
        49 of 60 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burner wouldn't start
        Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

        That's it!
        • Yury from Brooklyn, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WP3412D024-09
        35 of 48 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        burner head was rusted out. ordered 1 to see if part was correct. ordered 4 more to finish job.
        unscrewed old burner head ;disconnected 2 wires; repaced with new burner head and replaced wires. Unfortunately, before we really needed to replace the other burner heads, the cooktop itself developed a gas leak. We decided to replace the whole thing, and therefore would like to return the unboxed, unused 4 remaining burner heads.
        • Robert from Somerville, TN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WP3412D024-09
        13 of 17 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        burners and drip pans rusted through
        I first had to cut off electrical power to the stove top and then remove a little built up grease around the seams where the parts fit together. I then removed the burner head by twisting about 30 degrees and lifting. I then disconnected the spark ignighter wire, ( a slide on spade). This exposed the two screws that hold the drip pan in place. I had to use a drill to remove the screws on the two front burners because they were so rusty, just a minor problem. I then removed the drip pan. Cleaned a few years of buildup cooking splashes next, then installed new seal tape for gaskets and reversed the process. $250 in parts and 30 minutes work saved buying a $1300 cook top,
        13 of 23 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Broken burner - easy fix
        The burner was leaking a rust colored dirt and shooting flames all over the place. The top came off and I needed channel-locks to get the bottom half out. The wires were hard to get off and I broke one connector off so I soldered the wire on to the new part which fit the stove top perfectly. It still took less than a half hour to replace. Without problems it should take about 5 minutes.
        • Don from NEW YORK, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers
        • Parts Used:
          WP3412D024-09
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Leaking gas from sides of burner
        Counterclockwise turn old burner to remove. Unplug attachment wires. Replug wires place back in place turn clockwise. Done.
        • Homero from SEAGOVILLE, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP3412D024-09
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burner igniter problem.
        Replaced with a new one.
        • Dhirajlal from SKOKIE, IL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers
        • Parts Used:
          WP3412D024-09
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Gas was escaping from underneath the burner head
        The old burner head had corroded allowing gas to come out at the bottom. The actual replacement is just turning the head, lifting it out, transferring two wires with slip-on connectors from the old burner to the new one, and dropping the new one in place. Most of the time was spent sanding away corroded metal on the base to make a good fit. The information on the burner head says that the company has decided not to use a gasket under the head. I suggest that was a bad decision.
        • Edward from ALEXANDRIA, VA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers
        • Parts Used:
          WP3412D024-09
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11741732
              Manufacturer Part Number: WP3412D024-09
              Brand
              Model Number
              Description
              Magic Chef
              22M-7KLXV8
              Microwave Oven Combo - Gas
              Magic Chef
              22MA-7KLXV8
              Microwave Oven Combo - Gas
              Magic Chef
              22MN-7KLXV8
              Microwave Oven Combo - Gas
              Magic Chef
              22MW-7KLXV8
              Microwave Oven Combo - Gas
              Magic Chef
              24MA-7CKXWV8
              Microwave Oven Combo - Gas
              Magic Chef
              2543
              Range - GAS RANGE
              Magic Chef
              31003KAWD
              Range - Freestanding, Gas
              Magic Chef
              31003PAWD
              Range - Freestanding, Gas
              Magic Chef
              31003SAA
              Range - Freestanding, Gas
              Magic Chef
              31003SAW
              Range - Freestanding, Gas
              Magic Chef
              3116PRA
              Range - Gas
              Magic Chef
              3116PRW
              Range - Gas
              Magic Chef
              31203KAA
              Range - Freestanding, Gas
              Magic Chef
              31203KAW
              Range - Freestanding, Gas
              Magic Chef
              31203SAA
              Range - Freestanding, Gas
              Magic Chef
              31203SAW
              Range - Freestanding, Gas
              Magic Chef
              31203WAA
              Range - Freestanding, Gas
              Magic Chef
              31203WAW
              Range - Freestanding, Gas
              Magic Chef
              31213SAA
              Range - Gas
              Magic Chef
              31213SAW
              Range - Gas
              Magic Chef
              31213WAA
              Range - Gas
              Magic Chef
              31213WAW
              Range - Gas
              Magic Chef
              31213XAA
              Range - Gas
              Magic Chef
              31213XAW
              Range - Gas
              Magic Chef
              3126SRA
              Range - Slide-in, Gas
              Magic Chef
              3126SRW
              Range - Slide-in, Gas
              Magic Chef
              3126STA
              Range - Slide-in, Gas
              Magic Chef
              3126STW
              Range - Slide-in, Gas
              Magic Chef
              3127XTA
              Range - Freestanding, Gas
              Magic Chef
              3127XTW
              Range - Freestanding, Gas

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service