8610PV Magic Chef Cooktop - Overview

Diagrams for 8610PV

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
$17.96
In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(23)
Part #WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.
Drip Bowl - 6 Inch – Part Number: W10196406RW
$23.29
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(9)
Part #W10196406RW
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
Standard Y-Frame Range Surface Burner – Part Number: WP660532
$38.62
In Stock
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(2)
Part #WP660532
The manufacturer suggests replacing the receptacle at the same time.
Surface Burner Element - 8 Inch – Part Number: WP3191454
$144.17
Special Order
Surface Burner Element - 8 Inch
★★★★★
★★★★★
(3)
Part #WP3191454
This large surface burner is 2100W.
Stand Mixer Screw – Part Number: WP4159193
$12.95
In Stock
Stand Mixer Screw
Part #WP4159193
This screw is sold individually.
Surface Element Switch – Part Number: W10900107
$59.35
In Stock
Range Screw 632 X 5/16 – Part Number: WP74004005
$10.95
Special Order
Range Screw 632 X 5/16
Part #WP74004005
This screw is well under an inch long, and is made of metal.
Infinite Switch Knob - white – Part Number: WP7737P029-60
$32.95
Special Order
Infinite Switch Knob - white
Part #WP7737P029-60
This infinite switch knob is white in color. It is just over two inches in diameter and it has black lettering denoting the off, low, and high positions. This knob is also numbered 2 through 9 in black lettering, denoting the temperature level. Plus, this knob has a red indicator line, and is made of plastic. It will accept a 'D' shaped shaft.
WIRE/TERMINAL KIT - Series 10 – Part Number: 12001323
No Longer Available
CLAMP – Part Number: 7111P002-60
$16.66
Special Order
CLAMP
Part #7111P002-60
MANUAL, USE & CARE – Part Number: 74002580
No Longer Available
MANUAL, USE & CARE
Part #74002580
WIRES- CON – Part Number: 74001216
$37.39
Special Order
WIRES- CON
Part #74001216

Common Symptoms of the 8610PV

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced drip bowls in stove
71 of 134 people found this instruction helpful.
  • Liza from College Point, NY
  • Really Easy
  • Less than 15 mins
Took out the old drip bowls and replaced with new bowls.
Was this helpful?
Thank you for voting!
Rented appartment in which none of the drain pans were the proper size making it very difficult to cook
67 of 131 people found this instruction helpful.
  • Grace Mary from Canton, OH
  • Really Easy
  • Less than 15 mins
I removed the element and then the drain pan and replaced with the new correct pans. I replaced the element and all was well.
Was this helpful?
Thank you for voting!
Burner would not heat
27 of 35 people found this instruction helpful.
  • Edward from Malvern, AR
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got that done and finally selected the appropriate adapter for the stem/knob fit.
Was this helpful?
Thank you for voting!