Estate Washer Springs and Shock Absorbers

Estate Washer Suspension Spring

★★★★★

★★★★★

4 Reviews

The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. For this repair, you will need a 1/4 nut driver, a putty knife, a flat blade screwdriver, and a pair of needle-nose pliers. Disconnect the power supply, fill hoses, and drain hose to give you safe and easy access (have a container nearby for water left in drain hose). This item is sold individually, which is important as you may need to repair multiple springs in your appliance, which carries three suspension springs. As an inexpensive part, we recommend purchasing several at a time, as they can be very useful to have on-hand.

Estate Washer Tub Spring

★★★★★

★★★★★

22 Reviews

This part is used to balance the tub during spin cycle. Sold individually.

Estate Washer Tub Wear Pads - Package Of 3

★★★★★

★★★★★

14 Reviews

This package of pads contains three tub wear pads.

Estate Washer Leveling Spring

★★★★★

★★★★★

2 Reviews

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Estate Washer Suspension Pads - Package Of 3 This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

Estate Washer Counter Balance Spring Kit

★★★★★

★★★★★

4 Reviews

If your washer is shaking, banging, or even moving across the floor, this spring kit might be the fix. These springs help keep the tub balanced, especially during fast spin cycles. The kit usually comes with three springs, but your washer might only need one. It fits many Whirlpool, Kenmore, and Maytag models. Just unplug your machine before installing.

Estate Washer Plate Suspension

Estate Washer Spring Damper Assembly

Estate Washer Spring

Estate Washer Spring