Product Description
Tub Wear Pads - Package of 3 Specifications
This package of pads contains three tub wear pads.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Tub Wear Pads - Package of 3
Troubleshooting
This part fixes the following symptoms:
Shaking and Moving
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# 285744 replaces these:
AP3094518, 2978, 20103896, 285220, 285661, 285744, 285744VP, 3357327, 3363660, 62602
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Derek H - January 26, 2024
Verified Purchase
Tub wear pads...moderate level repair
Parts as required...old parts were metal with plastic now all plastic...you may have to sand the points before trying to insert and click into place as they are not an exact cast. Definitely needed to be replaced and part of the tub out of balance issue.
Quentin L - February 4, 2023
Verified Purchase
Problem Solved
The parts fit perfectly. Excellent value.
Kevin S - January 22, 2022
Verified Purchase
Great service, parts fit perfectly
Great how to videos, service was awesome thanks
Peter C - December 8, 2021
Verified Purchase
I'm sure that they would have been great
Received the wear pads the next day along with the other parts I ordered at the same time! I installed the new springs but didn't install the wear pads. I would need a special tool to install the pads, that I don't have and don't plan on buying.
Robert U - January 19, 2021
Verified Purchase
Kenmore clothes washer, tub wobbles severely on spin cycle
Ordered this set of replacement wear pads #PS334620, along with a replacement tub spring #PS11751118. Both arrived promptly in the same package. Was able to install myself without too much difficultly. Washer is working now, as good as new. Wife and family happy!
Damien C - March 21, 2020
Verified Purchase
Easy Repair and Excellent Service
Parts came via Purolator. Installed them myself with help from utube. Washer working well. I particularly liked the parts list with pictures etc. Once I entered my model number, there they were. After ordering, there were regular updates until the parts were delivered. I have a Kenmore washer but there was nowhere to obtain parts locally. I really appreciated the service and would recommend PartSelect to anybody.
Zenon Y - February 22, 2020
Verified Purchase
Washer Vibrating On Spin Cycle
I received the parts within a few days and replacement was simple with the aid of the repair videos. The washer works like new again!
Graeme D - October 9, 2018
Verified Purchase
Easy repair, perfect fit!
Parts came quick and to my door, parts were as described and OEM quality, not cheap knockoffs. Parts fit perfect and the videos really helped to speed repairs up. My washer is back up and running smooth now. And the wash tub is back to sitting straight and not hitting the side anymore.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 23 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer made a loud banging noise at end of spin cycle, leaked water and agitator seemed loose
After entering the model number of your appliance you will be taken to a page where all of the parts are displayed by sections. On that page about in the middle there is a heading called "Find Part By Symptom." I figured out from there which symptom the washer had and read what other people were saying and how they made the repairs. Basically I had three problem areas, Noise, Leaking and a problem with the agitator. I focused on the loud noise first and decided I needed to replace the clutch/brake assemblies. I found the clutch parts page and on that page there was a video on how to make this repair. This video is all you need to gain access to all moving parts located under the cabinet. Which ever part you are replacing, I recommend watching this video! After removing the console, back panel and cabinet then laying the machine on its back just as seen on the video, I had access to the water pump, motor, transmission and related clutch/brake parts. As it turned out I did not need the clutch/brake assembly but as a precaution and because the parts were cheap, I replaced the motor coupling, water pump and tub wear pads. I decided to replace the agitator assembly because of several worn parts associated with the dog ears/drive shaft ETC. I put the machine back upright and took off the top cap on the agitator, then there is an inner cap with seal that gives access to the 7/16" bolt you must remove to remove the agitator. However once the agitator was removed I noticed metal shavings and play in the shaft. I used a spanner wrench to remove the spanner nut. I removed the Plastic Tub Ring (has several clips around the outer tub), then removed the inner washer tub to replace the Drive Block. Replacing the Drive Block stopped the loud noise at the end of the spin cycle. Now just reverse the order to put the machine back together and your done. For my situation it was best to take the machine apart and decide which parts I needed before ordering to minimize errors. These machines are made very cheaply and are designed to brake at some point in time and it is very easy to determine which parts are worn because most are made of plastic. In this process I also noticed where my leaks (did I say Leaks) were coming from. There were two hose clamps installed improperly from the factory, so check all clamps, hoses ETC. and you should be good to go.
Other Parts Used:
-
Dexter from Milwaukie, OR
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
486 of 571 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine rocking about like crazy on spin
Took some online research to figure out how to get the cabinet off. Once inside I fitted the wear pads which were a breeze to remove using a knife blade to pry them up and removing them using the screwdriver. The springs were replaced one by one using strong fingers. The machine went through the spin cycle without any rocking or self-destruct noises.
Other Parts Used:
-
john from middle river, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
152 of 173 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Acting like it was unbalanced
I thought I would find broken springs but everything looked good. Comments and video very helpful.I figured springs must be stretched or worn out ,so for the money I figured worth a try. Insallation went well, washingmachine runs like a new machine. Much better than spending money on a new one. Thanks
Other Parts Used:
-
Michael from Glenburn, ME
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
91 of 96 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tub shacking back and forth
After seeing video it was easy . Took everything apart tub,basket,replaced all springs. Tub wear pads. It took longer because I cleaned eveything,took my time. There was a lot of deposits on tub and outer tub also some rust . Put it all back together all nice and clean . pluged it in put it in spin cycle and the motor just hummed. I than check to see if somethig was stuck no .Pulled motor tested it with out a load and did not work. Motor start winding went. Motor died. 2n one in 7 years. So I fixed that proplem I am a new owner of a Speed Queen washer and dryer .
Other Parts Used:
-
BOB from NIAGARA FALLS, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
78 of 1750 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer shakes violently on spin cycle
Remove the washing machine cabinet. Use a large flat head screwdriver to pry/wedge the tub suspension apart and gain access to the pad locations one at a time. My old pads were completely gone, so there was no need to remove them. Clip the new pads into place and re-install the cabinet.
This completely solved the violent chaking problem. There was no need to replace springs.
This completely solved the violent chaking problem. There was no need to replace springs.
Other Parts Used:
-
aaron from peoria, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
61 of 66 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unbalanced and walk across the floor on spin cycle
Part Select provided the problem determination information and the video on how to install the replacement parts. I ran into one problem, I could not remove the lock nut to remove the inter and outer tub. I should have bought the special wrench for $14, no local DYI or hardware store had the wrench. So, after examination I used a large screwdriver and wood block to lift the tubs up just enough to remove the old pads and replace with the new. The old pads showed only a wear, but was enough to spin the tubs off balance. The new tabs made the washing machine work like new. New washer $500, repair man $150, parts and information from Part Select $20 bucks, priceless.
Other Parts Used:
-
James M from Elkhart, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
44 of 54 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer moving 3 ft during the spin cycle sounding like elephants running through the house
Removed back panel to remove tub from shell. Unscrewed the brackets holding the springs. Used screw driver to pop out pads with hammer onto screw driver. Cleaned out tub and put grease on springs where they attach to bracket. Replaced panel and ran machine to find a leak. Took machine apart again to find the knocking of the tub against the back panel caused a whole in the plastic tub. Silicon and mechanical tape. Washer works fine for now.
Other Parts Used:
-
Annie from Haines, OR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
28 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Excessive tub wobble, tubs leaning forward of normal
Washer is 29 years old. Found that tub spring hooks into a simple (non-reinforced) hole in the base frame, and it had worn the hole through through the edge of the frame (key hole style). Due to age and low cost of parts, ordered all suspension springs, brackets, & pads. Once they arrived, took the tubs out (first time for that), found that the suspension pads looked fine, but the wear pads showed a lot of wear and the front one was snapped in the middle, perhaps an after effect of the spring failure. From my lack of attention, initially tried to get front pad into the wrong set of holes, a bad fit; corrected. Simply drilled a near-by hole in the base frame for the tub spring.
While the tubs were out, took them outside and scrubbed them clean. Also cleaned agitator parts using bottle brushes. Followed the PartSelect videos and owner comments for procedures, methods. Found that some miss some important info, but if you watch others you can combine the info to find what you need re disassembly/assembly.
At one point while attempting to remove the outer tub, did not realize that the screw that holds the rear spring bracket to the tub also holds the tub to the suspension plate.
Took me most of a day for the whole process, and I ended up with pulled/spasmic muscles from all the bending over, mostly from cleaning parts I think. Very helpful to have the parts breakout drawings, videos, others' experience.
While the tubs were out, took them outside and scrubbed them clean. Also cleaned agitator parts using bottle brushes. Followed the PartSelect videos and owner comments for procedures, methods. Found that some miss some important info, but if you watch others you can combine the info to find what you need re disassembly/assembly.
At one point while attempting to remove the outer tub, did not realize that the screw that holds the rear spring bracket to the tub also holds the tub to the suspension plate.
Took me most of a day for the whole process, and I ended up with pulled/spasmic muscles from all the bending over, mostly from cleaning parts I think. Very helpful to have the parts breakout drawings, videos, others' experience.
Other Parts Used:
-
David from GLEN BURNIE, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
16 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shaking on spin cycle
Removed the outside body of washer. Used 1/2 plywood between drum and wear pads to make space to pry out pads with screwdriver. Replaced suspension springs and tub spring (use waterproof grease on end of springs. Put washer back together and tested. Problem solved washer not walking all over floor anymore. Thanks for you help.
Other Parts Used:
-
Paul from Milwaukie, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
13 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tub oscillation
placed washer on side and installed new pads
and returned washer upright
and returned washer upright
Other Parts Used:
-
leonard from phil campbell, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
12 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gregory
August 16, 2021
At first my washer would not spin so i replaced the clutch. Now my washer dances across the floor so i replaced all of the springs. It still dances and makes an aweful banging noise. I am thinking it might be the tube wear pads. Should i be looking at something else?
For model number WTW5540SQ0
Hi Gregory,
Thank you for your question. If your washer is shaking and moving, there are some parts that you will need to check to see which one is causing the issue. You will need to check the tub wear pads, the suspensions pads, the agitator directional cogs, the leveling legs, the tub ring and the balance ring. We hope this helps! Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jose
February 1, 2020
Is these pads fit to my Kenmore washer? The model # 26732500
For model number 26732500
Hi Jose. Yes these pad fit your model 26732500. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334620
Manufacturer Part Number: 285744
Manufacturer Part Number: 285744
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts