AP6014700, 14210041, 21031, 22001915, 22003544, 22003545, 22003546, 3-5087, 3-89102, 305087, 3359453, 386047, 388094, 388743, 389102, 41001098, 675021, 7-75526, 775183, 775526
...
Show more
, 776101, 80014, 8182826, W10001130, WPW10001130VP, Y389102, Y775526
Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Billy P - January 7, 2024
Verified Purchase
Easy to install, worked perfectly.
Part came fast and was able to install easily. Great experience.
★★★★★
★★★★★
Ashton S - March 26, 2023
Verified Purchase
It’s okay,
Not bad part lil high priced food what it is.
★★★★★
★★★★★
MARION S - July 22, 2022
Verified Purchase
Perfect feet
Excellent. The two feet came in good time, and I was able to put them on myself. With the new feet it make the washing machine look a lot better not sitting on the floor any more. Thank you.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in..
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
57 of 81 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer not rotating
Washer not rotating, removed the control head and back cover. Then removed body housing around tube to get to the bottom. had to replace coupling on motor then removed the agitator tower and replaced the Parts for the tower agitator. unit is 16 years young and still looks and runs new, put a total of 55 dollars into repair and it should be good for a long time. This is with a family of five. Washing 2 loads everyday.
Broken water inlet syphon combined with missing feet was causing water to spill out of the washer
I removed the back of the washer, removed the old water inlet syphon, replaced it with the new one, and, with some difficulty, replaced the back of the washer, reattaching all of the parts to it.
I was familiar with the Kenmore / Whirlpool direct drive mechanism but at first I could not determine how to release the console. I finally found the end cap trim pieces would pop off revealing the 2 screws that hold the console in place. After removing them the console flips up and over the backboard. I then removed the 2 clips that hold the cabinet to the backboard, unpluged the lid switch connector and then tipped the entire cabinet forward and off the frame. This gives you access to the entire washing machine mechanism. Next I released the 2 metal clips that hold the pump on and push it out of the way leaving the hoses connected. Next I released the 2 clips that hold the pump on, these clips also have a screw to secure them. I was then able to set the motor to the side without removing any wires. The coupling parts had broken and were already off of the motor shaft and the input drive shaft of the transmission. I put the new drive parts on and had to tap them down untill they were flush with the end of the shafts. I then put the rubber coupling on the transmission drive end and aligned the motor drive to mate into the other holes in the coupling as I put the two back together. I then re attached the 2 motor clips with screws and reinstalled the pump with it's clips. I then reinstalled the cabinet onto the frame and replaced the cabinet clips. I then plugged in the lid switch connector and flipped the console back over and screwed it down. I then reinstalled the trim caps that had me stumped to begin with. The unit tested out OK.
The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.
Other Parts Used:
Rick from Lennon, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane
June 3, 2019
Would this foot front leg fit on back of machine? I have no back legs on machine there gone.I am renting a home the machine was left here without legs.Washer works but need legs.
For model number 11047512602
Hello Jane, thank you for inquiring. This is also the Back Leg, and is compatible to your washer.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Will
October 11, 2019
What size (diameter) is the post? Is thread size 13 tpi?Thanks
For model number Maytag LA510
Hi Will, thank you for your question. Unfortunately we do not have the thread size. However this part is photographed on a 1 inch grid background. So the post is about 3/8" thick. However this part is not the correct part for your appliance according to the model number you provided. I have linked the correct part below for you. Good luck with your repair.
Machine moves and rocks unevan to the right. It appears sometime
For model number HAV4657EWW REV
Hello Michael, Thank you for the question. We suggest checking the Suspension Springs to see if there need to be replaced or have come undone. This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747965
Manufacturer Part Number: WPW10001130