Refrigerator Timers

This part continually advances and alternates between activating the cooling cycle and the defrost heater.

This defrost timer will cycle for thirty minutes after every eight hours of run time.

This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number. NOTE: The black lead on the defrost timer, will go to terminal number 2.

This is a 6hr 21 min defrost timer.

This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

The timer will shut off the cooling system of the refrigerator and the defrost heater will turn on.

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.