This is used as the "floor" of the oven cabinet.
Note: Does not come with rivets or screws. Must be purchased locally.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range Bottom Panel
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Kelvinator.
Part# 316400601 replaces these:
AP3731407, 1056057
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
5.0
Filter By Rating:
5 Stars
22
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert C - February 25, 2021
Verified Purchase
very easy repair
received the bottom part of the oven(i made the mistake of putting tin foil on the bottom). delivery was fast and very easy to install. the part was not too expensive as well.
★★★★★
★★★★★
Lynn H - November 3, 2021
Verified Purchase
Everything as expected and really prompt, fast,service
From the first sentence with the staff and their, kind, helpful service,they were amazing. In two days part was here 100 perfect. Absolutely no complaint. Thank, Thank, thank you.keep up the great work.
★★★★★
★★★★★
Franca R - May 20, 2020
Verified Purchase
Easy Fix
When I called Customer Service, they were very helpful. Ordering the part online was quick and easy. When I got the part, it was in perfect condition, was the exact fit for the model, and it arrived the day before the scheduled date. Impressive!
★★★★★
★★★★★
Jacques C - October 31, 2024
Verified Purchase
Was exactly what I was looking for!
Great and fast service from the agent at tel.
Highly recommand this company…
Fast shipping! Nice people!
★★★★★
★★★★★
Lynn H - February 25, 2020
Verified Purchase
Great service. Perfect fit.
The staff were wonderful to find the right part. Even though we had the model number etc. Kenmore does not exist. They were patient and came up with another brand which fit perfectly. They even had me give them the exact size measuring. The part arrived fasted then expected and was a perfect fit.
★★★★★
★★★★★
Karen F - February 2, 2025
Verified Purchase
Easy install
This product came within the time frame given when purchased. Very easy to install after watching a short video un uTube.
★★★★★
★★★★★
Samuel M - February 8, 2020
Verified Purchase
Part was received and installed without any fuss or mess and fit perfectly.
I ordered the part and it arrived the next day, can't do any better than that. I am always a bit worried and concerned when ordering items on-line and so I was very pleased to have received exactly what I needed. Thanks to all.
★★★★★
★★★★★
John P - November 12, 2020
Verified Purchase
Great first experience
The part fit perfect, and was easy to install.
★★★★★
★★★★★
Erika K - 29 days ago
Verified Purchase
Great Bottom Panel !
This part was easy to install - now my oven looks like new ! Thank you ...
★★★★★
★★★★★
Irene W - September 19, 2020
Verified Purchase
Worked perfectly
The part made my oven brand new again as I had ruined it with a silver foil liner
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Aluminum foil accidentally put on bottom panel ....burnt up, left non removable residue.
After 15 minutes of frustration and back breaking I removed the oven door and had much better access to the panel, from there on it was all down hill.
Other Parts Used:
lewis from COLDWATER, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Aluminum foil baked on surface
Took out 2 screws, removed panel. When you put the panel in don’t push it tight to the front or the screws won’t align. Just place in gently and the screws will align
Other Parts Used:
Cindy from RHINELANDER, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had aluminum foil stuck on bottom
Removed 2 screws, pulled out the panel, replaced the new panel and replaced the two screws. Less than 5 minutes.
Other Parts Used:
George from JACKSON, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven bottom panel rusted away
Removed two screws removed and replaced panel.
Other Parts Used:
Ron from CINCINNATI, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom panel burned through
Remove two back knurled screws, lift out old bottom, screw in new bottom panel. Removal of oven door (two flip out handles at hinge( makes this a little easier. Our oven did not need any other dis-assembly.
Other Parts Used:
Barry from MENDON, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom oven pan was warped and discolored
Unscrew the 2 screws at the back of the oven bottom pan in the range. Place new oven pan in and rescrew the 2 screws. I could not get the two screws screwed back in. Since the bottom pan cannot move from its position, I felt like the two screws were not necessary.
Other Parts Used:
Kathryn from LAKELAND, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tpm
April 23, 2018
I put aluminum foil on the oven bottom panel, is there any way to get this off now that it is baked on there?
For model number 790.94334700
Hello Tpm, thank you for your question. Unfortunately, now that that is baked on there, it will be next to impossible to remove. You're best bet is to replace the oven bottom, which is Bottom Panel
Part Number: 316400601 . I hope this helps!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
October 7, 2017
This "bottom pan" has two screws in the back of the pan. It seems that i should be able to remove those screws and install the new pan. Is that correct? Thanks
For model number 79096212400
Hello Dan, thank you for contacting us. Yes, it should just be those 2 screws then it will pull out. Good luck with the repair!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Doris
October 28, 2017
If we want to change the bottom of the range, is this changed from the rear of the stove
For model number cre3875pba
Hi Doris,
Thank you for your inquiry. Before you begin any repair please unplug the appliance from the electrical outlet or turn the circuit breaker off. First, remove the two screws at the back of the panel. If the range has a convection fans with cover over them, then this cover will also need to be removed. There should be a screw on the top and the bottom of the fan cover that needs to be removed and then you can pull the convection fan cover out. Lift up on the back of the bottom oven panel and carefully pull back on the panel until you release the front lip of the panel from under the front of the oven cavity. This is a tight fit. It may take some patience to remove the bottom panel. It may take several tries to get the front lip released if you have a convection fan on the back wall of the oven cavity. Once you release the front lip of the bottom panel, you can pull it out of the range and work the new one in. Start working the new one in at the same angle as you pulled the old one out. Back of the panel tilted evenly up. Work the front lip into the front of the frame and then wriggle the new panel into place. Replace the screws in the back of the panel. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Janet
December 3, 2019
Aluminum foil is baked on the bottom of the oven. Is there something that will remove it? If the entire bottom needs to be replaced, what is the part number? I would want to get the correct replacement.
For model number 7909415
Hi Janet,
Thank you for your question. If aluminum foil melted on the bottom oven panel inside of your oven, there are some things that you can do to try and remove it. Try mixing baking soda and vinegar together in a large bowl. Make sure you add enough vinegar to allow a thin paste to form. Using a dry cloth, spread the paste over the area where the aluminum foil melted and let it set overnight. Use a wet-dry vacuum the next morning to remove any dried baking soda and any loose aluminum foil. Another option to try is to remove the foil by soaking an old towel in water and letting it set overnight. Remove the towel from the oven the next morning and throw it away. Then clean up any bits of foil from the oven. For any foil that is proving too difficult to remove, use a putty knife and try and remove it. If cleaning the bottom panel does not help, the part number listed for it is PS977589. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Marlie
December 22, 2019
Can you advise if you have a bottom sheet for this model and the cost. We stupidly put aluminium foil on the bottom. We are trying to remove but may have to replace it. Thank you.
For model number CFEH3054USA
Hello Marlie, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS977589. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
George
May 22, 2019
I ordered wrong part and need to replace it with below part
Manufacturer part number 316400601
What do i need to do?George
For model number LFEF3054TFA
Hello George, thank you for contacting us. If you have an order with our company and need to speak about that, you will have to contact our contact customer service by phone or by email at customerservice@partselect.com. Thank you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fran
February 27, 2020
1. Will i need to buy screws to install the tray. 2. Will i need anything else for to install the tray. 3. Also can i use the screws that exist on the tray to be replaced thank you for your help.
For model number LFEF3018LWA
Hello, Thank you for your question. You would not need anything else to replace that. Your screws would be- Part #: PS436031, you would need 4 of those. You are able to reuse the screws you have if they are not worn or stripped. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ben
August 21, 2019
Correct previuos question.It was model above .I need bottom panel costs $97 in your website your site part # ps977589 would work for the model above?
For model number CGEF3035RWA
Hello Ben, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS1991808. Hope this helps!
I am looking for bottom panel for the above model frigdidaire owen. Part : 316400601 your part# ps977589 will work for modelcgef3035rwa?
For model number CGEF4035RWA
Good Day Ben. Thank you for your question in regards to your unit (Model Number CGEF4035RWA). The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gord
January 26, 2020
Does this oven bottom measure 22x19?
For model number 316400601
Hello Gord,
Thank you for your question. The dimensions for the bottom panel is 22.5" x 19". We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
