Let's talk about your GE appliance and its predicament. Facing a little water issue? Not sure how to handle it? Relax. We have just the solution for you ? our trusted GE Float Switch Assembly. It plays a crucial role in keeping your appliance safe and sound. Here's why it's so important: Think of this component as a vigilant guard on duty 24/7. Its job is to control your water fill valve, stepping in to shut it off if the water level gets too high before the fill timer says it's fine. In simple terms, it helps prevent flooding. No excess water, no nasty floods, and no damage to your precious appliance ? isn't that a relief? Robust and reliable, the GE Float Switch Assembly certainly proves it's worth its weight in gold when it comes to preventing water-related disasters. So upgrade to this little lifesaver now and secure the safety and functionality of your dishwasher. Trust us, your appliance will thank you with a smooth and flawless performance.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lance
May 29, 2019
Dishwasher runs fine but the last of the water does not drain out. The water level is right at the trigger point for the float. I cleaned all water pathways out and i am pretty sure the pump is ok since only about 1-2 gallons are only whats left when the cycle is complete. The float switch is clicking but have not verified yet continuity of the switch when depressed.
For model number GDWF150V40ES
Hello Lance, thank you for inquiring. For this symptom you will want to replace either the Sump part PS959014, the Drain Pump Assembly part PS2577650, or the Drain Tube Kit part PS2339994. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joerg
August 11, 2017
Dishwasher is leaking like Niagara falls. I ordered some seals but then felt like the amount of water means it's over filling. Can I test the float switch somehow before I order a new one?
For model number CDWT980R10SS
Hi Joerg,
Thank you for the question, you can test the switch for continuity with a test meter. They can be picked up at a local hardware store if you do not have access to one.
Hope this helps!
Was this helpful?
Thank you for voting!
George
October 11, 2017
What is the proper name the switch that is tripped when the door is latched
For model number GDWT668V00S
Hi George,
Thank you for your question. That would be your Latch. I have linked the part down below for you. Good luck with your repair.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
