GE/GE_Thumb/00115502i02.gif
See part 203 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Terminal Block Kit

$76.52   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS953027
Manufacturer Part Number WB17T10011
Manufactured by GE
Product Description

Terminal Block Kit Specifications

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB17T10011 replaces these:
AP3736048, 1085735, WB17T10012, WB17T10015, WB17T10016, WB17T10023
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Felix
    February 3, 2018
    After a power surge the control panel went blank. I can not find a fuse on this model. Would this part possibly be the culprit?
    For model number JSP46SP3SS
    Hello Felix, Thank you for your inquiry. This part is where the power cord comes into the stove and hooks it into the wiring. If your control panel has gone blank, however, I would test the control panel and electronic control board first. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Diogo
    December 11, 2018
    Where do I find the red wire that attaches to the terminal block furthest to the right? The block melted only where the red wire on the far right was connected and it burned the red wire a little. The black and the white ones are fine. Why did only the red wire get burned? I am going to replace the power cord and the terminal block but also want to replace the red wire. Please help, thank you.
    For model number JB850SF1SS
    Hello Diogo, Thank you for the question. The wire may have not been fully connected and shorted out. We do not carry the wiring sorry. What I suggest is that you contact the manufacturer directly for the wiring. Hope this helps, good luck with this repair!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jeff
    February 25, 2018
    Hi, my oven isn't heating up. So far i've replaced the control panel, the heat sensor and element. What else could it be?
    For model number JB640MR4BS
    Hi Jeff, Thank you for your question. If you have replaced the other parts and the oven is still not heating, you will need to check the terminal block. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Maria
    September 16, 2019
    Re: GE profile stove the conventional bake and roast does not work, the fan is not moving like it should be. Do i need a new motor?
    For model number PCB909SP2SS
    Hello Maria and thanks for writing. Your first step should be to check the temperature sensor # WB21X22134. If that turns out ok you will have to consider a replacement motor. There is also the terminal block kit that might have a defect # WB17T10011. Hope this helps. Please contact us anytime.

    Was this helpful?
    Thank you for voting!
    RYAN
    July 23, 2017
    Can one just purchase the terminal screws individually without purchasing the entire terminal block for hooking up to three prong outlet?
    For model number JSP47S0H2SS
    Hi Ryan, Thank you for your question. Unfortunately for this part to get the screws you have to order the whole kit. I hope this helps!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 2 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        terminal block melted
        The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
        • jonathan from willow springs, IL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WB17T10011
        49 of 56 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Original terminal block plastic shielding melted, protecting appliance when the wires overheated.
        Safety first * Unplugged 220 VAC from outlet. Removed shield cover screws with 1/4" hex nut driver (5 screws). Removed all 6 silver screws from terminal block with 1/4" nut driver, freeing all wires. Removed the green ground screw and ground bracket from center terminal. Cut away (using the drill) melted original terminal block plastic to access the 2 black 1/4" nuts holding original terminal block onto appliance. Discarded the original damaged terminal block. Attached the new terminal block, aligning the mounting holes and the terminal block the same way the original terminal block was lined up and re-used the black 1/4" nuts (original used because the replacement package did not include new black screws). I bought a new appliance cord, since the original cord overheated. Reattached all wires using the 6 new silver screws. Start with the middle terminal by attaching the appliance wires and the ground bracket. The ground must be attached to the bracket and the bracket bridges between the terminal block and the range body. Reattached shield cover. Plugged in appliance. Note: it doesn't matter which outside wire attaches to the outside terminals (both are hot), but the middle wire (neutral) must attach to the middle terminal. However, the ring terminal should be flush on the terminal block so you don't bend the ring.
        • Brian from DOVER, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver
        • Parts Used:
          WB17T10011
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS953027
          Manufacturer Part Number: WB17T10011
          Brand
          Model Number
          Description
          General Electric
          13421-1
          Range
          General Electric
          13440-1
          Range
          General Electric
          13441-1
          Range
          General Electric
          13461-1
          Range
          General Electric
          13461-2
          Range
          General Electric
          13461-3
          Range
          General Electric
          13540-1
          Range
          General Electric
          13541-1
          Range
          General Electric
          137480
          Range
          General Electric
          137481
          Range
          General Electric
          14325-1
          Range
          General Electric
          14420-1
          Range
          General Electric
          14421-1
          Range
          General Electric
          14440-1
          Range
          General Electric
          14441-1
          Range
          General Electric
          14448-1
          Range
          General Electric
          14460-1
          Range
          General Electric
          14460-2
          Range
          General Electric
          14460-3
          Range
          General Electric
          14461-1
          Range
          General Electric
          14461-2
          Range
          General Electric
          14461-3
          Range
          General Electric
          14520-1
          Range
          General Electric
          14521-1
          Range
          General Electric
          14540-1
          Range
          General Electric
          14541-1
          Range
          General Electric
          14548-1
          Range
          General Electric
          14560-1
          Range
          General Electric
          14560-2
          Range
          General Electric
          14560-3
          Range

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service