Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Dual Infinite Switch Specifications
This switch allows you to choose which size burner you require according to the size of the pots and pans you're using.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Kenmore, Frigidaire.
Part# 318191023 replaces these:
AP3363364, 318191023, 318191027, 318220022, 903097-9010, 9030979010
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jean Sebastien B - January 14, 2020
Verified Purchase
Infinite burner switch
Fast shipping and perfect part! Easy repair!
Rolf L - May 18, 2021
Verified Purchase
Easy to install fixed my problem
Exactly as the original easy to install.
Alyre A - May 12, 2020
Verified Purchase
Perfect fit
Fast shipping..professionals..tks
Andreas B - September 27, 2018
Verified Purchase
Great part
Exactly what I needed
Mario B - April 28, 2020
Verified Purchase
Easy
fast
Wayne L - April 3, 2020
Verified Purchase
exact part needed
delivery was fast , part was well packaged and easy to install !
Frank S - June 7, 2021
Verified Purchase
Dual Burner not working
Dual Infinity switch fixed the problem I had with the dual burners. The burners work fine now.
Paul H - May 5, 2020
Verified Purchase
Works perfect
I had a burner that operated only on high. This part took less than 30 minutes to install but it was like I had a brand new burner afterwards. Be very cautious as you install - 2 wires go to the same tab. And 2 tabs are not used and actually aren’t even on the old part. Just swap one wire at a time. Time saving hint : take a photo of the old part before you disconnect anything :-)
Clayton E - December 19, 2019
Verified Purchase
Perfect
Exact replacement. Worked great
Alan B - February 26, 2026
Verified Purchase
Perfect part, installed in a flash!
Part was here quickly and is ding it’s job!
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
range has inner and outer eye(hot plate) . outer eye would turn wide open and off
ordered switch for on, off. Turned power off at breaker.opened oven door, underneath top console there are four philip screws.. remove top and take slotted screwdriver and unscrew four plastic nuts. I used pocket knife..remove plastic cover , and then remove four more philip screws to remove metal plate that holds all four control switchs. remove two screws that held switch in place
and unplug wires and plug new switch in... Saftey first gentlemen, there is no ifs and buts or maybes when it comes to your life.. make sure you turn your power off.. works like a charm , can adjust heat from 1 to hi..thanks for partselect great price and speedy shipping...James K. Luper
and unplug wires and plug new switch in... Saftey first gentlemen, there is no ifs and buts or maybes when it comes to your life.. make sure you turn your power off.. works like a charm , can adjust heat from 1 to hi..thanks for partselect great price and speedy shipping...James K. Luper
Other Parts Used:
-
James from Kentwood, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
20 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual infinite range switch on left front burner of glass top range would stay on full high no matter what setting was selected on the burner knob.
Remove 4 knobs from front of stove.
Remove plastic nuts that are directly underneath oven knobs. Loosen with plyers and unscrew.
Remove front cover.
Remove 8 screws holding down electrical panel. Remove panel. Remove 2 screws holding switch into place. Transfers wires from old switch to new switch so you hook them up correctly. Then reinstall in reverse order. Job complete in 15 minutes.
Remove plastic nuts that are directly underneath oven knobs. Loosen with plyers and unscrew.
Remove front cover.
Remove 8 screws holding down electrical panel. Remove panel. Remove 2 screws holding switch into place. Transfers wires from old switch to new switch so you hook them up correctly. Then reinstall in reverse order. Job complete in 15 minutes.
Other Parts Used:
-
Joseph from YOUNGSTOWN, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual burner would only work on high and only the large burner worked
Replaced the dual infinite switch behind the panel. The wires were easily matched, even though the switch looked a little different. Works perfectly now.
Other Parts Used:
-
Misty from CUNNINGHAM, TN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS820835
Manufacturer Part Number: 318191023
Manufacturer Part Number: 318191023
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST