Frigidaire/Frigidaire_Thumb/14Q3NVCV.gif
See part 41 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Water Inlet Valve

★★★★★
★★★★★
9 Reviews
$44.51   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS815509
Manufacturer Part Number 134190200
Manufactured by Frigidaire
Product Description

Water Inlet Valve Specifications

This washing machine water inlet valve has two ports for water to enter.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not stop filling with water | Leaking | No hot or cold water | Will not fill with water
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 134190200 replaces these:
AP3363282, 1014339, 00633917, 01132783, 08001821, 08006734, 08014911, 08015532, 09948913, 1132783, 131167100, 131199700, 131258000, 131389300, 3161140, 3202984, 3204379, 3261053, 5300633917, 5303202984 ... Show more , 5303206933, 5303207418, 5303210628, 5303261053, 5303272066, 5303280328, 5308006734, 5308015532, 633917, 8001821, 8006478, 8006734, 8014911, 8015532, 9948913, DF141174-000, F132811, F136404, F136404-000, F137632, F140274, F140274-000, F140274000, F140560, F140862-000, F141174-000, F141174000, F76138-1, F76684, F76684-1, NQ00171447, Q000149791, Q000158951, Q000165531, Q000171301, Q000171442, Q000171443, Q000171445, Q000171447, Q000199022, Q000614163, Q171442, Q171443, Q171445, Q171447, WQ149877, WQ158951, WQ171442, WQ171443, WQ171445, WQ171447, WQ614161, WQ614163 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dennis
    February 5, 2018
    How do I get the top off so I can get to the defective parts on a top loading washer ?
    For model number FWS445RFS2
    Hi Dennis, Thank you for the question. The top is held in place by clips. You can use a putty knife or a flat head screw driver to release the clips. They are located on each side of the appliance. Just insert the screw driver and depress the clip and it will release. Hope this helps!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Alex
    June 25, 2019
    Will this fit a white Westinghouse washer.
    For model number MWX233RES4
    Hello Alex, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS815509. Thank you for your inquiry, good luck with this repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    E
    November 11, 2019
    Hello, what does the "water intake valve" do?
    For model number Fsw833as1
    Hello E, Thank you for the question. The Water Inlet Valve is at the back of the appliance and the fill hoses connects to it and acts as a "gate" that opens to fill the appliance with water. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Vera
    March 2, 2020
    Question —. While spinning and laundry slightly off centre causes drum to wobble until it’’s in full swing. Can this be repaired? Machine is old—2003- 06.
    Hello Vera, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Frigidaire Washer Water Inlet Valve

      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 29 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Washer Continued To Fill To Point Of Overflow
      First I removed the top panel held by four screws at rear of panel, pulling the panel foward and up. Then disconnected the power and water connections. Then I removed the two screws holding the flow valve to the washer rear panel,pulled the valve foward ,removed the two electric connectors, pinched the water clamp with pliers and removed the water connection to the valve. Then replaced with the new valve followed the above steps in reverse order, finishing up by re placing the water connections and power. Then checked fo proper replacenent and leaks before replacing top panel.
      • alvaro from east hampton, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      79 of 87 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      No Cold Water
      Checked problem on-line and discovered it was the water inlet valve. Matched the part on part select. Com. Finding the part was very easy. Part select had a grid behind the picture to help determine the size and pictures from all sides. Removing the old part, matching it, and replacement took a total of 30 minutes. I now have clean clothes.
      • Mark from Pittsburgh, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      16 of 18 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      water continued to flow into machine during spin cycle
      After moving machine to an area that allowed easy access to the unit, disconnected the water supply hoses from the inlet valve.
      Removed the two screws that keep the back in place, removed the clips that keep the top in place, moved the top over far enough to get the valve out. Removed the screw that keeps the inlet valve in place, disconnected the power supply to the valve, Pulled valve out in order to remove the water outlet hose. Repalced with new vale, and reversed order to install. Works just fine now.
      • Howard from Lcolnton, GA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        134190200
      15 of 17 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      No hot Water to washing machine
      S/O Water , Removed front panel, removed screws from side panel water valve accessible. Removed screws that hold water valve, installed new valve reassembled washing machine.
      • Dominick from Las Vegas, NV
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        134190200
      9 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water valve not shutting off correctly
      After the new replacement part arrived, I took off the complete back panel (after unplugging the electrical and shutting off the hot & cold water supply). I disconnected both hot & cold water hoses, unscrewed the 2 screws holding the water valve, unplugged the 2 electrical wires for the water valve sending unit, unclamped the outlet water hose. Then I reversed order with new water valve. Put everthing back together in about 20 minutes overall. I did also replace the hot & cold water supply hoses with a better quality hose. Works like new! Thank you very much.
      • Eric from Sebastopol, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      8 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      leaking water inlet valve
      removed the two 'lock down flanges' from the back of the machine, lifted the top from the front and slid it forward to access the valve. Removed the two electrical connections then the compression ring from the hose on the output side. Removed two screws holding the valve in place, then reversed the process.

      I wish this valve was made of metal rather than plastic. I had to replace it because the threads were stripped. Here's the heads up. Make sure the fittings on your supply hoses are 'clean' or you'll mess up the plastic threads and not get a good seal.
      • Steven from Oklahoma City, OK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      8 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The threaded male coupling on the water inlet valve is plastic and broke during moving.
      I installed this part on a stackable washer-dryer unit. First, I removed the hoses (one had broken off already, damaging the cold water coupling). Using a nut driver I removed the screws on both L-brackets in back that help secure the dryer unit to the washer base. Then, I located 2 other screws securing the dryer to the washer base. These were fairly accessible in the recess where the dryer exhaust vent is located, directly above the water inlet valve. I removed both with a nut driver. I thought I would have to also unscrew 2 more screws on the other side of the dryer, but these were not accessible. So I lifted the side of the dryer I had unbolted to get to the water inlet valve. And voila! It lifted up. I placed a 2x4 on edge to keep the dryer tilted open. The inlet valve is attached to the back inside of the washer by a single screw on the Kenmore, which I removed with a phillips screw driver. Reaching inside the back of the washer, I disconnected the water hose by pinching the retaining clip with pliers. Then I pulled the electrical connections off the the hot and cold solenoids and the unit came out. The replacement unit was installed in reverse.
      • Alan from Denver, CO
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        134190200
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      water leaked into machine when turned off
      Removed top,removed hose from inlet valve to washer,removed hot and cold inlet hoses and with phillips screwdriver removed water inlet valve assy and replaced. Reassembled and tested.

      My order arrived 2 days after i ordered same. Excellent service from partselect, Thank You....
      • Henry from Frenchtown, NJ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        134190200
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Inlet valve leaked water from supply line(s) back into washer.
      Pulled washer electrical plug from receptacle.
      Unscrewed hot and cold water inlet hose connectors.
      Removed screws retaining backplate.
      Removed back plate.
      Removed two screws connecting valve assembly to frame.
      Pulled two spade electrical wire connectors from valve assembly.
      Opened hose clip securing hose on outlet side of valve assembly, using pliers.
      Pulled hose from valve assembly.
      Valve assembly now free.
      Reversed above with replacement valve assembly.
      • John from Powhatan, VA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The water would not stop filling
      First I did some research and concluded the water inlet needed replacing. Obviously once you know what you need you go to PartSelet.com for parts and installation info. I went through the front of the machine. So I removed the front of the washer(2 screws at the front bottom)slide down the panel to separate it, lifted the top cover of the washer(2 screws on the underside of the lid and 3 wire connectors to the fill switches) and then loosened the right side panel(3 screws at the bottom). Now pushing the wash barrel to the side it gave me enough room to squeeze my arms in to the inlet part. Be careful there are sharp edges and screw tips inside the machine. I removed the 2 wire connectors(hot and cold solenoids) inside the washer and then removed the screw from the back outside that holds the water inlet to the machine. Now I was able to pull the inlet closer to me so I could get pliers on the hose clamp to loosen and remove the old part. The new part was an improved version that was more solid. I attached the hose affixed the squeeze hose clamp and pushed the water inlet into place. The screws were not threading so I grabbed a couple of self taping hex head screws and a nut driver head for my drill and screwed the inlet in from the back of the washer. Then I replaced the wire connectors to the water inlet. With the water inlet complete, I reattached the right side panel, the washer lid, fill switch connectors and the front panel. Washer fixed and running perfectly!
      • Jeff from Monticello, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134190200
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      9 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS815509
          Manufacturer Part Number: 134190200
          Brand
          Model Number
          Description
          Frigidaire
          38712
          Washer - WASHER
          Frigidaire
          38802
          Washer - WASHER
          Kenmore
          41724182300
          Washer
          Kenmore
          41724182301
          Washer
          Kenmore
          41727182700
          Washer
          Kenmore
          41729022890
          Washer
          Kenmore
          41729042990
          Washer
          Kenmore
          41729042991
          Washer
          Kenmore
          41729042992
          Washer
          Kenmore
          41729052990
          Washer
          Kenmore
          41729052991
          Washer
          Frigidaire
          41739012890
          Washer - Stackable
          Frigidaire
          41739012891
          Washer
          Frigidaire
          41739022890
          Washer
          Frigidaire
          41739022891
          Washer
          Kenmore
          41740032990
          Washer
          Kenmore
          41740042990
          Washer
          Kenmore
          41740052990
          Washer
          Kenmore
          41740142000
          Washer
          Kenmore
          41741042000
          Washer
          Kenmore
          41741052000
          Washer
          Kenmore
          41741142000
          Washer
          Kenmore
          41742042100
          Washer
          Kenmore
          41742052100
          Washer
          Kenmore
          41742142100
          Washer
          Kenmore
          41743042200
          Washer
          Kenmore
          41743042300
          Washer
          Kenmore
          41743052200
          Washer
          Kenmore
          41743142200
          Washer
          Kenmore
          41743142300
          Washer

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service