This kit is used for trash compactors. It includes both gears, pin spring, C-ring, ram stop, and ram cam.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Compactor ram gets stuck | Noisy | Doesn’t stop at end of compacting cycle | Won’t start
This part works with the following products:
Trash Compactor.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Jenn-Air.
Part# 882699 replaces these:
AP3122987, 735285, 882699, 14211018, 41001084, 4149667, 4154800, 4163381, 4163385, 7-49046, 7-49052, 7-49130, 7-76839, 7-77124, 749046, 749052, 749130, 776839, 777103, 777124
...
Show more
, 882699, W10451279, Y4149667, Y776839, Y777124
Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.9
Filter By Rating:
5 Stars
9
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
F W (Bill) C - September 3, 2021
Verified Purchase
Great part. Good instructions available.
The part was exactly what I needed. My trash compactor is back operating
★★★★★
★★★★★
Christian S - August 14, 2021
Verified Purchase
Easy repair
Quick delivery
★★★★★
★★★★★
Ata S - April 16, 2021
Verified Purchase
Easy repair
Parts were exactly as advertised. Instructional video for repair was bang on. Had the unit back up and running in under an hour.
★★★★★
★★★★★
Juanita G - August 22, 2020
Verified Purchase
Perfect!
Part was perfect...just what we needed. Repair done and machine works great.
★★★★★
★★★★★
Giovanni T - October 18, 2019
Verified Purchase
A1
everything was perfect good job
★★★★★
★★★★★
Brent L - June 24, 2019
Verified Purchase
The right part.
The right parts for the job and fast shipping that's all I need.
★★★★★
★★★★★
Gerald W - June 4, 2019
Verified Purchase
Appliance Repair was Great
Efficient assistance when ordering (by phone), fast delivery and the correct part. All good credit to Partselect! June 2019.
★★★★★
★★★★★
Brian G - May 7, 2019
Verified Purchase
Easypeasypumkinsqeezie
Looked like a genius, saved a couple hundreddollars.
★★★★★
★★★★★
Carole B - January 10, 2019
Verified Purchase
Worked perfectly - easy repair.
The part arrived very quickly and was easily installed. It was unfortunate that the original broke after only a few years of light usage, but hopefully this replacement part will last longer. It seemed to be of better construction than the original.
★★★★★
★★★★★
Lester F - October 28, 2018
Verified Purchase
Easy and fast
All good.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 27 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Compactor stuck in lower position
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way. Removed the drive gear and the washer. Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Trash compactor started making "bumping" sounds when the RAM went through a cycle and tried to come back up. Finally, one day heard a "pop" went the RAM traveled to the bottom. The gear broke in half. Purchased the gear parts "KIT" online and repair took 15 minutes. Easy to do. Unfortunately, this was not only problem. The "cause" of the gear breaking was the Momentary Start/Stop Switch was bad. It's failure led to the main switch not working. The unit could not tell when the RAM had reached the top of it's cycle. The other problem was that I didn't put trash in the compactor. Suggest HIGHLY to never operate the unit's RAM mechanism without the compactor being at least 1/2 full per the instruction manual. Running it empty can cause a major problem, such as the gear breaking/stripping.
Other Parts Used:
Matt from Houston, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
21 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large Drive Gear Failure (split in half)
Moved the compactor out from under cabinet, laid it on it's side, removed bottom casing (two nuts front, three back), remove compression pin from small drive gear shart, replace new small drive gear and install compression pin, loosen motor mounts to allow large gear replacement, remove circlip holding large drive gear to shaft, remove and repace damaged gear, set gear clearance and tighten motor mounts, grease gears, replace bottom casing. .
Other Parts Used:
Mark from Littleton, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
17 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive Gear Broken
Replaced the gear and unit worked execpt the plunger hit the side of the garbage container. This appears the be the reason the gear broke in the first place. Defective assembly from the factory.
To correct I had to remove the newly installed gear system remove inside cardboard side cover, Remove the screws that hold the bearing for the lift screw so I could remove the chain. After removing the chain I could adjust the plunger to be level and not hit the side of the garbage container on its way down.
Other Parts Used:
clyde from Covington, GA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plunger was stuck down
Took the under housing off to see the drive gear. It had broken in half. (Exactly like one of the suggestions said). Replaced the drive gear and re-assembled. It worked great!
Thanks.
Other Parts Used:
Daniel from San Clemente, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
11 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
trashcompacter was getting jamed,making noise
First i removed 2 screws that holds it to the cabinet,pulled the unit out removed the cover off the bottom of the unit,then i notice the gears were damaged,but was not supprised,because the machine gets over worked.Then i removed one clip,removed one gear,the other gear had a pin,tapped the pin out with a punch ,pulled that gear off.then replaced both gears .Got it back together and it now works like new.i am very pleased with your service,you responded right away and let me know the order had filled.i ordered it on sunday night and i recieved it on tuesday morning .i will surly use your service in the future you guys are great. thanks alot
Other Parts Used:
david from tampa, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic Drive gear broke
The plastic drive gear broke and the unit was locked in the down position. The repair kit contained all of the parts required to fix the problem plus other replacement parts for the gear drive unit. It was very easy (about 20 min.) to replace the gear and other parts. The unit works fine now.
Other Parts Used:
Terry from Spring, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic gear broke this is the 2nd time in less than 1 year so this is the 2nd repair
Unplugged trash compactor and removed from undercounter. Took cover off and removed broken plastic gear. Replaced with new gear and put cover back on
Other Parts Used:
Mary from Lilburn, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench set
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken gear
Unscrew the bottom, pull out the chain, replace the gear.
Other Parts Used:
Francine from bowie, MD
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After almost 20 years, the plastic gears had stripped - go figure
Simply removed the two plastic gears (held on by some sort of clip), put the new gears in place using the spacing instructions that were provided in the kit ....... and it is working!
Other Parts Used:
Robert from Springfield, TN
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Victor
May 29, 2019
Your youtube video shows several parts in the drive gear kit but the picture for part #882699 only shows the main drive gear. Do the other parts such as the mother gear, retainer clip, washers, ram stops and pin come in the kit as well?
For model number GX900QPLB0
Hello Victor, Thank you for the question. This drive gear kit includes both gears, pin spring, retaining clip (c-ring), ram stop, ram cam, and instructions. Thank you for your inquiry, good luck with this repair!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Al
May 21, 2019
My drive gear wheel is dwg4149668. Will this gear replace my broken gear.
Hello Al, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rod
February 10, 2022
Compactor won’t automatically return after compacting . Must press off to complete cycle. Gear drive ok
For model number GC900QPHBO
Hello Rod, thank you for writing. We have researched the model you have provided and have found the part you are looking for is the Directional Switch PartSelect Number PS11744742. The function of the directional switch on your trash compactor is to ensure the ram lowers to compress your trash, then returns to the top position. If your trash compactor does not complete this task, will not stop at the end of the compacting cycle, or is noisy during operation, you may need to replace the directional switch. We hope to hear from you soon.
Ram always goes down and up ok. At end of return to up cycle it frequently runs and pounds/shakes machine several times before it stops. This all started when the foot treadle start switch acted up. Repaired and replaced the metal piece attached to treadle and which contacts the start button on frame of machine at bottom.
For model number kucs03ftss0
Hello Ken, Thank you for contacting us. I suggest checking the Directional Switch, PartSelect Number PS11744742 with a multi meter and check for continuity. You can also check the Drive Gear Kit for wear or damage. Hope this helps!
Our part number in the big gear is 4149668, 4149667 is listed, will the repair kit work for the 4149668
Hello Sharon, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
David
November 6, 2021
Will this gear fit whirlpool model GX900QPPS4?
For model number GX900QPPS4
Hello David, Thank you for your inquiry. We have researched the model number you have provided and and show that this part is listed as compatible to your model. We hope this helps.
Was this helpful?
Thank you for voting!
Maurice
December 23, 2021
Broken start knob
For model number Tc407w6
Hello Maurice, thank you for your question. The knob is listed on our site as Key PartSelect Number PS386676. We hope this helps.
Was this helpful?
Thank you for voting!
Timothy
November 22, 2022
We start the compactor and it goes down but then starts grinding when its operating and won't stop unless you turn it off and then back on. Then it will return to the top. Replaced gear a year ago but it seems wobbly. Not sure if that's the problem though after seeing something about a reverse switch.
For model number 13619101
Hello Timothy, thank you for contacting us. The issue is most probably related to the directional switch, part number PS11744742, the rotary switch, part number PS382679, and the drive gear kit, part number PS398589. Please reach out to customer service if you need help placing an order. Glad to be of help!
Is part # PS398589 for Manufacturer # 882699
Jenn-Air Trash Compacter in stock? If not, how long is the backorder?
For model number TC50781
Hello Gregg, Thank you for the question. According to the Website Availability, this is a On Order part. This means we do not currently have the part in stock and waiting on a shipment from. As long as Jenn-Air has stock ready to ship, this takes about 10-15 Business Days for the part to arrive at the Warehouse and approximately 3-7 business days to ship out and arrive to you. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
