Product Description
Oven Igniter Specifications
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
LG, Kenmore.
Part# MEE61841401 replaces these:
AP5214765, MEE61841402, MEE61841403, MEE62306201, MEE63084901
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Wardlaw Heating And Cooling W - January 21, 2022
Verified Purchase
Universal Oven Igniter
Received in resonable amount of time. Repair went easy.
STEVE S - November 9, 2021
Verified Purchase
Came fast but was triple the price of Amazon for the same part.
Exact same part and brand on Amazon for 62$ and this place charged 190$ .
Lynn C - July 23, 2021
Verified Purchase
LG Oven repair
Exact part delivered in record time. Thank you!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven wouldn't ignite
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Other Parts Used:
-
Martin from KEWASKUM, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
Other Parts Used:
-
Sheila from HOPKINTON, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
6 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
March 6, 2019
The oven doesnt fire up and get any heat. After a couple minutes i get an f9 code. Stove burners work fine. I took out the bottom of the oven and the heat shield. I closed the door and tried to fire it up. No glowing on the igniter.
For model number LRG3061ST
Hello Brad, thank you for your question. We would recommend testing the igniters and the oven temperature sensor first. If those parts are not faulty you should check the gas and safety valves. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
November 22, 2019
When i turn on the oven i get a glow from the bottom of the oven but sometimes does not ignite. I am wondering if the ignitor is getting week of it the temperature sensor is intermittent. When it fires up it takes a long time to do so at least 5 min.
For model number lrg3095st
Hi Kevin, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
January 30, 2019
Our oven works normally most of the time, but occasionally decides to stop heating after it heats to desired temp. I've replace the temp sensor, but it still does this intermittently... my wife turns on all the stove burners, opens and bangs the oven door, and it seems to start heating again. this doesn't happen very often...
we had some work done on the gas line leading into the house, and i'm wondering if there is some debris in the line that is clogging up the valve on the oven.
any advice?
For model number LRG3081ST
Hello Tom, thank you for your question. If the sensor has been replaced but the oven isn't heating as it should we would recommend testing the oven igniter and the oven gas valve first. If those parts are tested and are working properly you may have an issue with the electronic control board. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
January 30, 2019
To follow up on the last question where you recommended looking at the igniter: The oven ignites reliably, the problem is cutting out occasionally while maintaining the temp. My wife thinks it is contamination in the gas line, so she fiddles with the range burners and bangs the door, and it seems to work for her. It only happens occasionally, so it seems to me that we may have something blocking the gas line every once in a while. Is there a way to test or clean whatever might be the problem? Thanks.
For model number MJX62571701
Hi Tom,
Thank you for your question. It is normal for a gas oven once it reaches the desired temperature, to turn off after the oven has reached its desired temperature before shutting off while maintaining a consistent temperature. If it is cycling on and off too quickly the issue is usually a weak igniter. If your wife is the banging the door the issue could be the door switch depending on the model of your stove and it may need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
April 2, 2019
The oven doesn't heat/convection. The broiler works and the 5 top burners work. All gas valves are in the proper position. I assume I need part #5900 heater, plain?
For model number LRG3095ST
Hello Doug, Thank you for the question. If the igniter (Plain Heater) is not lighting/glowing it will need to be replaced. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shirley
July 21, 2021
My oven does not heat at all. It’s only three yrs. Old and kept clean. Could it be the ignition??
For model number Fg4322es
Hi Shirley,
Thank you for your question. If your stove is not igniting, then the issue is the igniter and you will need to replace it. We hope this helps! Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
November 4, 2022
Oven heats up to Temperature (350 degrees) then the temperature drops to like 165. The oven doesn't stay at the temperature you want it to be. What part do I fix the Temperature Sensor or Oven Igniter.
Thank You
For model number LRG3091ST
Hello Barbara, thank you for contacting us. We would recommend testing the temperature sensor and the igniter for continuity using a multimeter to pinpoint the faulty part. According to our data, the temperature sensor, part number PS11732697, is the most likely culprit followed by the igniter, part number PS3535362. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
George
January 7, 2022
my Owner's manual for my gas range lists two model numbers. how do I tell which one is mine? I see no matching label on the range.
I need an ignitor for the oven. your site lists a different part number for each model number. how can I tell which one to get?
For model number LRG3061ST or LRG3061BD
Hi George,
Thank you for your question. To verify the correct model number for your range, you will need to check the model number on it. We have included a link that you may reference on where to locate the model number on your range. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Additional Links:
Bill
February 19, 2022
How long should my oven take to preheat to 350 degrees? It is taking 25 minutes or more?
For model number LRG4115ST
Hello Bill, Thank you for the question. An oven will normally preheat in 12-15 minutes. We suggest testing the Temperature Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Bob
May 24, 2022
My Lg3095ST/01 gas oven won’t heat , get code F11 on display . I’m thinking the igniter is gone ?
For model number LRG3095ST/01
Hello Bob, Thank you for your inquiry. This error code indicates the stove has reached a certain temperature within 5 minutes. Check to see if the ignitor is drawing between 3.2 and 3.6 amps which it needs in order to igniter. Another cause could be the temperature sensor, which you can test with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3535362
Manufacturer Part Number: MEE61841401
Manufacturer Part Number: MEE61841401
Brand
Model Number
Description