76037 LG Range - Overview
Sections of the 76037
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 3 of 3]
Dc Voltmeter
This part number matches the current model number 76037
PartSelect #: PS16718687
Manufacturer #: 76037
No Longer Available
NLASUB 0070637
This part number matches the current model number 76037
PartSelect #: PS17185673
Manufacturer #: 76037
No Longer Available
SVC-COMPRESSOR SUPPORT
This part number matches the current model number 76037
PartSelect #: PS17498716
Manufacturer #: DA81-08710A
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Oven Igniter
PartSelect #: PS3535362
Manufacturer #: MEE61841401
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
$317.43
In Stock
ACCESSORY ASSEMBLY,GRILLE
PartSelect #: PS16556423
Manufacturer #: AAA30001401
$354.67
Special Order
Common Symptoms of the 76037
[Viewing 4 of 4]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven wouldn't ignite
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Parts Used:
-
Martin from KEWASKUM, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
11 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both ovens would not light
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Parts Used:
-
George from Meadows Place, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
Parts Used:
-
Sheila from HOPKINTON, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
9 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!