Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michel O - April 20, 2021
Verified Purchase
Easy repair, perfect part. Great price and fast delivery
This was the exact part needed and it was delivered very fast. My appliance is working like new now, thank you. I will definitely deal with you again for future repairs
★★★★★
★★★★★
Gary F - August 25, 2020
Verified Purchase
Easy repair.
Arrived fast and was what I ordered.
★★★★★
★★★★★
Corey G - August 20, 2022
Verified Purchase
fast
it was shipped fast and works well
★★★★★
★★★★★
Peter T - April 17, 2025
Verified Purchase
Perfect part
The dryer works like a charm, very fast delivery.
★★★★★
★★★★★
Shayla H - September 7, 2022
Verified Purchase
Exactly what was needed, great service
Excellent description and site was very helpful with problems and solution advice. Will recommend and use again!
★★★★★
★★★★★
Ryan T - June 16, 2021
Verified Purchase
Took 5 minutes to install.
The part arrived in a day, I was very impressed with the help I received from the Customer service department. Thanks ??
★★★★★
★★★★★
Allen F - February 19, 2022
Verified Purchase
Exactly the same as the original part it replaced.
The part was delivered sooner than scheduled and our dryer was back up and working in no time at all. Well done!
★★★★★
★★★★★
Alain C - February 18, 2022
Verified Purchase
Part was ontime and exactly as described.
Exactly what I needed at a fair price
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would run with no heat
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Other Parts Used:
Richard from ORMOND BEACH, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
96 of 111 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer worked fine except the dryer did not heat up
I unplugged the dryer and disconnected the vent. I pulled the dryer away from the wall so I had room to work on it. Pulled the top cover off (slides back). Took the door off Took the front adjustable feet on the bottom off Unscrewed all of the face screws on the front of the dryer Took the two screws off of the back of the control panel holding the control panel to the metal frame. Gently pulled on the control panel to reveal 4 screws under the control panel to be able to take the front cover off. Pulled the front cover off (the dryer door front cover). Pulled the dryer vent cover off (two screws). I could now see the heating element with sensor/fuse (right side). Did a continuity test (beep) on all visable sensors/fuses on the heating element. No beep on the thermal fuse (used website diagram to locate parts to test and replacement part numbers). Got the part after about a week, tested the parted (it beeped), replaced with new part and put dryer back together, plugged in and the dryer heated. Problem solved.
Other Parts Used:
Catherine from COVINGTON, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
29 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat to my Dryer
1. Had to find out what was causing the problem by eliminating each part one by one using a multimeter. I got a video link from parts select on how to do this.
2. Then got another video link sent to me by parts select on how to take my dryer a part and replace the part.
3. Followed it step by step and it worked really well.
4. The process was great except shipping was excessively high for such a small part.
Other Parts Used:
James from ELLENVILLE, NY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
12 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wasn't heating up
Replaced thermal fuse
Other Parts Used:
TERRY from NEW BOSTON, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
when you push start button dryer does always start
order start button and was sent thermal, reordered and rep sent me a button that was not for my machine even though she had model no.,called third time and was told I had to order new control panel but they were not being manufactured any more.so it is not fixed
Other Parts Used:
Harley from OKLAHOMA CITY, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Added air diverter on exhaust hose and blew out heat limiter fuse.
Entered dryer from rear exhaust port. Removed 2 screws and 2 clip on wires. A little awkward of process but superior method over disassembly of drum and main parts.
Other Parts Used:
Robert from Jenkintown, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heater wouldn't get hot - suspected thermal fuse
Removed the top, the control panel and the door. The heater assembly came out thru the front, without having to remove the drum. Easy replacement
Other Parts Used:
Mark from Mendham, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
thermal fuse went out
Watched a repair video. Very easy to replace, about an hour to repair.
Other Parts Used:
Donald from Michigamme, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
61 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Miriam
April 15, 2018
On my LG electric dryer my cooling light stays on. The dryer runs but will not heat up? What could the problem be?
For model number DLE2250W
Hi Miriam, Thank you for the question. I suggest testing the Thermistor,PartSelect Number: PS3529026. When testing you will test for resistance. At 70 degrees the resistance should be 9.3K ohms, 90 degrees would be 7.7K ohms. at 100 degrees it should be 6.2K ohms, 120 degrees 4.3K ohms. If the thermistor reads outside of range then it needs replaced. Hope this helps!
21 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Nicole
March 10, 2018
Our dryer was not drying or heating up at all! We changed the high limit thermostat and it heated up for two minutes, then it quit heating again. Can you help?
For model number DLE5955W
Hello Nicole,
Thanks for your question. There are a few parts you will want to test with a multimeter for electrical continuity. Replace any that do not show continuity. Test the thermistor, thermal fuse, temperature sensor, and the heater.
I hope this helps.
My dryer quit heating but will run i tested all thermostats and heating element all tested good except the thermal cut off fuse could this be the problem
Hello Cliff, yes this could be issue regarding your dryer not heating. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
8 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Raymond
October 4, 2017
What is the cut off temp. For this part. Also there's a part # 6931el3003c w/reset button can this switch be used in place of 6931el3003d? Also temp . For second switch?
For model number DLE5955G
Hi Raymond,
Thank you for your question. This part closes at 221 degrees and opens at 257 degrees. No you could not. Good luck with your repair.
7 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Larry
January 31, 2018
Dryer does not even turn on. No lights on screen light up. Drum light does not come on ether. Ordered circuitboard from you folks after research. Did not fix problem. No activity on push button screen. If thermal fuse is blow will dryer lights light but will not start ? No one ever mentions this.Thanks !
For model number DLE1001W
Hi Larry,
Thank you for your question. If the dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch, the drive motor, the thermal fuse and the belt. I hope this helps. Thank you and have a great day!
7 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Tony
January 9, 2018
The dryer does start but does not heat up , there was a fair amount of lint and other debris in the vent hose but has since been cleaned out..l read the dryer will not start if the fuse is blown , is that correct ?
Hello Tony, Thank you for your inquiry. That is correct. Lint buildup can cause the dryer to overheat and blow the thermal fuse. You should also check the high limit thermostat as well. Hope this helps!
6 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Mike
December 12, 2018
Will a blown thermal fuse keep power from going to start switches and display panel?
For model number Dle2516w
Hello Mike, thank you for your question. Yes, this part can cause the unit to not start, but it shouldn't cause the control panel to go out and lose power. You can test the fuse with a multi meter to see if it has failed. When tested the part should read zero or close to zero when tested. I hope this helps!
6 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Peter
January 11, 2020
If the thermal fuse is no good will it show an open on a continuity test?
For model number DLEX5101V
Hi Peter. Your meter should read 0 ohms of resistance if the fuse is good. If the display/needle does not move that means it is a bad fuse. Thank you for your question and good luck with your repair!
5 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Robert
February 25, 2018
It takes about two hrs. To dry a normal load of clothes. Checked vent lines and filter all are clear. Actually been like this for several years. Looking for any ideas you might have. Thanks!
For model number DLE8377WM
Hi Robert, Thank you for the question. There are a few parts you can check. There is the sensor, PartSelect Number PS3529161.The sensor controls the temperature in your dryer and will turn off once your clothes have reached the desired dryness level. If you notice that your dryer is not giving off enough heat to dry the clothes or is taking too long to dry, this may indicate that a repair to the senor is required. You can also check the Thermistor, PartSelect Number PS3529026.This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. Hope this helps!
5 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Susan
November 19, 2018
Was the thermal fuse you suggested for the heater box or exhaust?? the heat was working great last monday
For model number Dlex7177rm
Hello Susan, Thank you for the question. This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. Thank you for your inquiry, good luck with this repair!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance correctly, it is sugge...
The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. If the thermostat is ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
