Drawer Slide Rail - Left Side

Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal...

Remove the following: lower rails, evap cover, ice maker assembly, attaching hardware for light and evap fan. Follow directions for replacing defrost heater. cut and splice wires for new defrost thermostat, and temperature sensor using adhesive line shrink tube. reassemble. Work like new.

Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers.

I removed the shelf, unscrewed the slide rails and replaced them with new ones. I replaced the shelf, put the food back in and I was done. Thanks, john bowers

I started with removing all of the old parts.I compared all the new parts with the old.Everything matched up good.While I had it apart I cleaned all of the old parts to be used again.Everything went back together very well.I would have no problem ordering parts again,and doing a repaire.

my 15 year old son did the install in 30 minutes
back in functional order and looks like

satisfied customer!

First I removed the vegetable drawer and glass shelf. I matched up the 'new' drawer slide rail next to the broken slide.
I then used a phillips head screwdriver to remove the 2 screws that held the slide in place.
After removing the broken slide rail, I installed the new rail, replaced the vegetable drawer and glass shelf. New item worked like a charm.
The drawer slide arrived really quick after my order was placed. Approx. 2 days after ordering the part, it was on my front door step.

First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer.

The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!

Removed(unscrewed) broken parts and replaced with new parts. I suggest parts be marked left or right

I ordered the parts to repair my two drawers in the refridgerator. MY daughter climbed on them to reach the top shelf. While I was ordering the parts for the drawers, I thought I would find out if I could fix the ice and water dispenser. I looked up the model number and found the parts I thought would fix it...I read other customers repairs and figured it was the mother board. I ordered it on Thursday night, received it on Saturday and fixed it less than ten minutes. The video repairman was so helpful, I watched it a couple of times and felt confident to do the repair. My son was very proud of his mom...now we have ice, water and drawers that open and close......