See part 4008 in the diagram
( Grid squares measure 1x1 inch )
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Light Bulb - 125V 20W WB36X10063
Fits your JES1033WA!
$24.75
Special Order
Fits your JES1033WA!
PartSelect Number
PS247267
Manufacturer Part Number
WB36X10063
Manufactured by
GE
Product Description
Light Bulb - 125V 20W Specifications
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If your light bulb is burnt out, it will not be able to do this, and will need to be replaced. Before you change the bulb, be sure to check that the light socket still works, as it may need to be replaced as well. Remember to disconnect the microwave from the power source before you begin this repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB36X10063 replaces these:
AP2030053, 770489
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 11 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bulb out
The most difficult thing was removing the star security screws Both Home Depot and Lowes have tools to do this. The repair was a piece of cake, may have taken 15 min. Unplug 120v, remove case, bulb, replace and reassemble. GE doesn't want consumers fooling around inside the case, so be careful.
Other Parts Used:
-
Oran from Chesapeake, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
29 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave light bulb burned out
None of the manuals or schematic diagrams gave a clue as to where the damn bulb was and messing around in the guts of a microwave is not for the faint of heart. Once I found it the rest was easy -- take out the old bulb and put in the new one. Be careful reassembling the case -- microwave leakage is not good.
Other Parts Used:
-
W. Bruce from Highlands Ranch, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
19 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace interior bulb
Pretty simple but required buying a set of security bits (#68549) from Harbor Freight for $7.00 to remove the outer cover of my GE JES2051SNSS microwave. At first glance I thought the cover would remove by going towards the front of the microwave, but it ended up just needing a tug to the rear. I like this site because they have pictures of the exploded appliances that show what your getting into.
Other Parts Used:
-
Chris from VIRGINIA BCH, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light bulb was burned out - the microwave still worked, but no light
removed the outer case - this was the most difficult part because the microwave is large, heavy, and cumbersome.
once the outer case was off, it was simple - easy to see where the old part was and the replacement was an exact match
it was then just a matter of disconnecting the old burned out part and replacing it with the new one
then wrestling the outer cover back into place and re-fitting the screws.
Microwave is fine now and hopefully good for another 10 years!
once the outer case was off, it was simple - easy to see where the old part was and the replacement was an exact match
it was then just a matter of disconnecting the old burned out part and replacing it with the new one
then wrestling the outer cover back into place and re-fitting the screws.
Microwave is fine now and hopefully good for another 10 years!
Other Parts Used:
-
Janet from BLOOMFIELD, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out bulb
unplug oven from power
remove glass turntable
remove cabinet housing
remove burnt out bulb
order correct part
reinstall new bulb
reattach cabinet housing
install glass turntable
plug into power outlet
confirm light bulb on
remove glass turntable
remove cabinet housing
remove burnt out bulb
order correct part
reinstall new bulb
reattach cabinet housing
install glass turntable
plug into power outlet
confirm light bulb on
Other Parts Used:
-
Allan from Waxahachie, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light out
get microwave out of cabinet. Took two people because it was very heavy. Used special hex drive socekt because of dimple in the female nut.
Other Parts Used:
-
charles from RATHDRUM, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing burnt out bulb on microwave
To remove the outer cover of the microwave you have to unscrew 7 or 8 Phillips screws but most of them have "secure" type heads, so you need a driver with a hole in the middle, to fit over the pin on the screw head. I had one of those already, so it wasn't a problem. The metal cover is slid between rubberized strips on the front face of the enclosure and needs to be lifted and tugged out quite firmly in order to release it. Once the cover was removed, the bulb can be seen attached to the main frame of the microwave by a soft metal lug that can be bent back by hand to release the bulb and its integrated holder. The wiring harness simply pulls off of the bulb prongs and there you have the charred remains of the original bulb! I tried every appliance store and hardware store in Bismarck, but nobody had this part. When I typed in the serial number on the bulb, Partselect's site came up with exactly what I needed. Replacement was a simple reversal of the process, making sure not to over-tighten the sheet metal screws on the cabinet. Voila! We have light beams again. Thanks Partselect.
Other Parts Used:
-
Paul from BISMARCK, ND
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb burned out
Removed outer cover, Cash with for Phillips screws as I recall, Then remove six or eight safety screws with Phillips special bit. Pulled bulb, cover back, removed, and replace bulb, back together all set
Other Parts Used:
-
Jesse from BRENTWOOD, NH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light didn't work
I assumed light was burned out and got a replacement bulb.
Removed back and side screws with slight difficulity.
Was not able to remove cover. The top front would not loosen. I tried every trick in my 80 year repertoire. I gave up and put it back together.
I emailed PartSelect last week explaining the problem. So far no reply.
I am sure I have the right model # and others seem to have little trouble removing the cover.
I paid $85 + tax for the oven and it has worked well for about 8(?) years.
From what I read here, I figured I could handle the bulb replacement.
I'm just out the cost of the bulb and shipping and the oven still works. It would have been nice to have the light work again but we will just wait until it quits working and buy another inexpensive unit.
Removed back and side screws with slight difficulity.
Was not able to remove cover. The top front would not loosen. I tried every trick in my 80 year repertoire. I gave up and put it back together.
I emailed PartSelect last week explaining the problem. So far no reply.
I am sure I have the right model # and others seem to have little trouble removing the cover.
I paid $85 + tax for the oven and it has worked well for about 8(?) years.
From what I read here, I figured I could handle the bulb replacement.
I'm just out the cost of the bulb and shipping and the oven still works. It would have been nice to have the light work again but we will just wait until it quits working and buy another inexpensive unit.
Other Parts Used:
-
FLEET from OLYMPIA, WA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Light Bulb went out
I used a phillips screw driver and a special type bit to undo the screws from the cabinet and found the light bulb and took the old one out and put the new one in and put it back together.
Other Parts Used:
-
Shirley from JACKSON, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 14, 2017
Bulb inside microwave is out. I found the part no ps247267 on your webpage. I clicked on installation instructions and got several non helpful reports from individuals who installed the part but I could not find any actual instructions. One of the comments mentioned pictures of replacement but I can't find them. Help.
For model number JES2051DN2BB
Hi Bill,Thank you for the question. In order to replace the bulb in the interior of the microwave, you will need to remove it from the cabinet so you can remove the outer case. Once removed you can see where the bulb is located. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
January 18, 2018
Is this bulb and socket one piece.
For model number JES2051SN3SS
Hi Pat,
Thank you for your question. Yes, the socket and the bulb are one piece as shown in the photo. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
March 9, 2018
I need to replace the light bulb. My bulb has a right-angled plug. The one I found on your site shows straight plugs. There does not appear to be room to accommodate a straight plug in my microwave. Can you help?
For model number JES1460DS3BB
Hello Jim,
Thanks for your question. The bulb with the right-angled plug for your model is part number PS1017527.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
ALEX
December 24, 2019
Is their a tutorial showing how to change the light bulb on this model? If so? How can i
Locate it?Thanks, alex
brookfield, wi.
For model number JES1460DS3BB
Hello ALEX and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair
https://www.youtube.com/watch?v=NejD2wd1sjs
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandy
November 27, 2017
Looking to replace the light bulb. Part number 4008 if I am correct. Exactly what do I have to do to replace the light bulb? Surely I don't have to pull the microwave out of the wall to get to the bulb access. Is there easy access from inside the microwave? Thanks
For model number JE1860sh04
Hi Sandy, Thank you for the question. In order to replace the bulb in the interior of the microwave, you will need to remove it from the cabinet so you can remove the outer case. Once removed you can see where the bulb is located. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Annie
March 6, 2018
Bulb out need video to replace
For model number WB36X10063 Bulb
Hi Annie, Thank you for the question. Very sorry but we do not have a video as of yet for this bulb. We do have one that is similar. Please see the link below. Hope this helps!
https://www.youtube.com/watch?v=NejD2wd1sjs
Was this helpful?
Thank you for voting!
Jim
December 25, 2017
The bulb is burned out. Does the cover come off fairly easy and what is the best way to accomplish that. I assume that once the cover is removed the old bulb pops out and new bulb inserted. No other aspects that would complicate the process?
For model number JEB1860SM1SS
Hi Jim, Thank you for the question. Yes, the cover is held in place by a few acres around the back of the appliance.Once removed you can see the bulb and how it is held in place. Should be a fairly easy repair. Hope this helps!
Was this helpful?
Thank you for voting!
Jim
December 27, 2017
See following question and answer to gain perspective for this question: The microwave is a built into the cabinet over the oven. Are you saying that the microwave has to be removed from the cabinet to access bulb? I was assuming that you could access it from the inside of the microwave. The bulb is burned out. Does the cover come off fairly easy and what is the best way to accomplish that. I assume that once the cover is removed the old bulb pops out and new bulb inserted. No other aspects that would complicate the process?Jim for model number jeb1860sm1ss
answer:
hi jim, thank you for the question. yes, the cover is held in place by a few acres around the back of the appliance.once removed you can see the bulb and how it is held in place. should be a fairly easy repair. hope this helps!
For model number JEB1860SM1SS
Hi Jim,
Thank you for your question. There is a video on our website that you can reference on how to install the light bulb. The microwave in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS1156014. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Alan
February 15, 2022
Is there a way to NOT have the light go on when the door is open? I want to paint a spot on the door and allow it to dry overnight without having the light remain on all night. If this is not possible, I suppose I will close the door and hope the paint dries overnight. The paint is made to be used on the cavity of the microwave. Thank you. AL
For model number JEB1860DM1WW
Hello Al, Thank you for your inquiry. The simplest way to keep the light from coming on is to pull the bulb out. You would need to remove the microwave cover, locate the bulb, remove it and then replace the bulb in the morning and replace the cover. We hope this helps.
Was this helpful?
Thank you for voting!
Brenda
September 26, 2019
Can I found a video that can show me how to replace my light bulb?
For model number JES2051SM2SS
Hi Brenda, Thank you for the question.We do not have a video as of yet sorry. In order to replace the bulb in the interior of the microwave, you will need to remove it from the cabinet so you can remove the outer case. Once removed you can see where the bulb is located. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
$27.28
In Stock
Produce Preserver Filter
$27.28
PartSelect Number: PS3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f... 
$25.31
In Stock
Affresh Washing Machine Cleaner - 3 pack
$25.31
PartSelect Number: PS1960673
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe... 
$21.95
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$21.95
PartSelect Number: PS12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ... 
$37.89
In Stock
Refrigerator Deodorizer
$37.89
PartSelect Number: PS12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food. 
$32.93
In Stock
Cooktop Cleaning Cream
$32.93
PartSelect Number: PS12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d... 
$35.68
In Stock
Model Cross Reference
This part works with the following models:
PartSelect Number: PS247267
Manufacturer Part Number: WB36X10063
Manufacturer Part Number: WB36X10063
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST