Replacing your Kenmore Refrigerator Stripper Arm Kit
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# W10297244 replaces these:
AP4507899, 1557714, 2198598
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice Maker stripper arm cracked
This was a pretty easy repair...I removed the retaining screws and slid the assembly off its tracks. Disconneting the wiring hardness was a pain but after a few minutes I had that off (use gloves, it gets cold in the freezer after a minute)
Once I had the unit completely out of the freezer the replacement part took only minutes to replace.
Reversed the process putting the ice maker back in - a few hours later my ice buck was full again.
Simple repair - well worth the effort.
Other Parts Used:
Mark from Newtown, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One screw stuck
Had to widen screw access hole in motor frame enough to use the phillips bit with my 12V impact driver. That worked perfectly. It took an extra two hours of trying to break the screw free without stripping it and figure out what to do when it wouldn't budge. Once I got the screw out the fix went quick and the ice maker now works great. If you have a coroded screw go straight to the impact driver.
The icemaker ice stripper arm broke off one side a year ago and the repair guy said we couldn't just replace that part. The other side broke recently and I thought I wold check on the interenet to see if I could find just that part and not pay for a service call and new ice maker.
Sorry I didn't do the repair but my husband did. It took him about an hour and a half. He did have to take the main part of the ice maker out of the fridge and take a couple of pieces off t oslide the tabs from the stripper arm into place. It was great. Fixed the icemaker for $22.00 dollars with no service fee. I can't imagine what they would have charged me.
Other Parts Used:
Linda from evansville, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice cube kept getting jammed in rghtmost stripper arm finger.
Used the online video and followed it step by step. Very good instructions on how to perform the repair.
Other Parts Used:
Stephen from CORRALES, NM
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stripper arm broke
I had to disassemble the unit. After it was out I unpluged the wires and removed the broken ends of the stripper. Most of my time was spent figuring out how everything worked. I installed the new arm and slipped the unit back in place. It works perfectly. I could do it in under 30 minutes now. The cost savings is well worth the effort.
Stripper arm interferred with teeth, finally broke off.
No trouble following directions sent but when putting it back together the sensor in the back became dislodged. .
Other Parts Used:
Karl from San Francisco, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stripper arm kept coming disloged from ice
Instructions with the kit made it very simple to remove and install the new stripper arm.
Other Parts Used:
Ken from Jackson, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
November 19, 2019
Replaced arm stripper (ps2378115) on ice maker filled but has not ejected an ice, been about an hour anmd ten minutes.
For model number 52703100
Hello Ken, thank you for writing. It may be that a different part is faulty. You will want to consider either the Auger Motor or the Dispenser Control Board. We will need the model number for your refrigerator to determine the compatible replacements for it. We look forward to hearing back from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
July 29, 2021
My stripper arm keeps being dislodged. A piece of ice fails to eject properly and jams the stripper arm. I've reinstalled it three times now. The most recent didn't last a month. Do I need to replace only the stripper arm, or do I need to replace other parts as well?
For model number GD5RVAXVY01
Hello Tom, Thank you for the question. We suggest removing the Ice Maker to check for any damage to where the Arm is held in place. If the Ice Maker is good, the arm can be replaced. We hope this helps!
Installation instructions don't match what i see. Also instructions say fill cup must be replaced at the same time as ice stripper.
For model number PS2378115
Hi LD,
Thank you for your inquiry. There is a video just under the information on the part that you may reference on how to install it. If you do not find that helpful, you will need to consult your owners manual. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
David
April 30, 2019
Ice maker on door.
For model number ED5LTAXVL01
Hello David, thank you for inquiring. The replacement Ice Maker for your model is part PS869316. We hope this answers your question.
Was this helpful?
Thank you for voting!
DOUGLAS
July 5, 2024
I'm trying to narrow down why the Ice Maker (IM) is all of a sudden freezing up. It appears that the drain hole on the "fill cup" may be freezing up, which leads to water spraying everywhere and freezing. The cup then becomes filled and frozen solid. Is it as simple as the stripper arms needing replacement because the Right side may not be ejecting properly and freezing up the Fill Cup drain hole? I have removed the IM unit several times now, but have not noticed that the stripper arms are the culprit.
Thank you,
Douglas
For model number 10653602201
Hello Douglas, thanks for reaching out! If you have noticed that there is still ice in the mold after the cubes are flipped out, it could be that the ejector arm (PS11743312) or stripper arm (PS2378115) are faulty, or that the ice cube heater (PS11749915) that releases the cubes from the mold is not working, and when more water gets added, it overflows the mold and backs up the fill cup (PS11743318). Hope this helps, good luck with this repair.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
