Part Location Diagram of 318372211 Frigidaire 6-Inch Coil Burner Element
See part 14A in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

6-Inch Coil Burner Element

★★★★★
★★★★★
5 Reviews
$50.14
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2368974
Manufacturer Part Number 318372211
Manufactured by Frigidaire
Product Description

6-Inch Coil Burner Element Specifications

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Frigidaire, Tappan, Kenmore, Kelvinator.
Part# 318372211 replaces these:
AP4455337, 08002899, 08003117, 08004664, 08010466, 08011659, 08011963, 08067762, 08067762@, 2117621220, 22200020002, 222T021P02, 222T026P01, 222T026P02, 222T026P04, 222T026P05, 222T026P08, 222T026P09, 222T026P10, 222T026P12 ... Show more , 222T026P13, 222T026P14, 222T057P01, 222T062P01, 3012222, 3015210, 3015607, 3017441, 3051433, 3051803, 316048500, 316265300, 316439801, 318372201, 5301314951, 5303015210, 5303017441, 5303309000, 5303325550, 5308002899, 5308004664, 5308011659, 5308011963, 8002899, 8003117, 8010466, 8011659, 8011963, G382061, G382062, G54967, G54968, G55444, G56274, G56325, K001314951, K001323559, K1300716, K1303296, K1303298, K1306046, K1308077, K1310238-1, K1310242, K1311107, K1314329, K1314951, K1323558, K1323559, K1506105, P382040, P382062, Q000212671, Q000212674, Q212674, WQ212672 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 13 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Burners on 53 year old range kept going out
When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more burners went out for good and we were stuck using the back left burner for all of our cooking. I opted for the premium burners and made sure to compare my terminals with the ones online to be sure they mounted the same. I removed the burners and terminals, clipped the wires going into the terminals, and removed the top of the stove. I followed the directions that came with the new terminals, pushed in the new burners and viola! All four burners now work. I gave the stove a general cleaning and now my 1954 Kelvinator looks and cooks like it is brand new. It was easily the best $109 I've spent on my home.
Other Parts Used:
Surface Element - 8 Inch - 2600W Terminal Block Kit
  • Matthew from Columbus, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
34 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced elements
pull the element out and slide the new element in.No tools needed,it's that easy.
Other Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch Surface Element - 8 Inch - 2600W
  • Steve from North Troy, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
28 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no power to element/no heat
removed burnt out terminal block, installed new- I soldered wires instead of using wire nuts, took a little extra time, but I feel it's a better connection. I later found that my rotary control must have burnt out too, I swapped it with one from another burner. I'll be ordering a couple rotary controls next from this company. All parts were nice quality. Received quickly.
Other Parts Used:
Terminal Block Kit Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • Joe from Mount ephraim, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced four surface elements
Pulled out the existing surface elements (4) and inserted the four new ones. New surface elements work great. Heats like a new cooktop stove.
Other Parts Used:
Surface Element - 8 Inch - 220V
  • RICHARD from HOUSTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The right front burner element shorted also taking out the surface burner switch.
I determined that the failure was due to age and wear on the element. Therefore I thought it wise to replace all four burners as a preventative measure. First unplug from power! Replacing the burners was plug-and-play simple. Replacing the switch was easy: Remove the back panel, pull the control knob and remove the two screws securing the switch. Move the terminals to the new switch (one at a time) and mount it with the two screws and replace the back panel. NOTE: The foot bracket on the large burners were about 1/32" too stout and the burner element would not seat in the ring properly. I made a slight adjustment with my grinder and everything fits perfectly.
Other Parts Used:
Surface Element - 8 Inch - 2600W Surface Burner Switch
  • Joe from TACOMA, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A stainless steel cover was over the burner when it was turned on.
I removed the old burner, drip pan, and burner terminal block. Cut and stripped the wires. I used wire nuts to connect the wires and used shrink tube to secure the nuts. Installed the drip pan and the burner. Hint: When turning the burner on use a vent fan or open windows or doors to get rid of smoke from the new burner.
Other Parts Used:
Terminal Block Kit Drip Bowl - 6 Inch
  • Mark from HOLIDAY, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner element failed
Plugged the new one in and it worked.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
Other Parts Used:
  • Robert from New Castle, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
went go use oven and need heard a pop and dust smoke coming out vent , found lower element blew apart, since only store around was sears they didn't have part,so my son found your web site. so odered it came in 2 days, while going to order oven element we knew that one of the stove burner wasn't he
just unplug stove and unscrewed element out of back wall cleaned up mess and reinstalled. stove top you just pull out bake element and push back in
Other Parts Used:
Oven Bake Element
  • Donald from Canandaigua, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
An aluminum saucepan had overheated and melted onto the element.
Unplugged the element and the melted on pot. Plugged in the new element. I thought I might need a whole new cooktop but a new element was very easy to find online.
Other Parts Used:
  • Alice from Batesville, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic spatula melted onto the unit
I unplugged the damaged unit and plugged in the new one.
Other Parts Used:
  • Thomas from Port Allen, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harry
June 4, 2019
Is the right front burner coil 6" or 8", how do you measure it?
PartSelect logo
Hello Harry, thank you for writing. This is the front left and right rear 6" Burner Element for your model. When measuring a stove's element, you measure from the outside edge to the outside edge. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Moshe
March 28, 2023
Hi, I am trying to replace all four stove burners and drip bowls. Which of the 2 drip pans I found on the first page of the "items" fit this model? And what coils do I order to make sure I have all 4 that I need? Thank you!
For model number CFEF311GSA
PartSelect logo
Hello Moshe, thank you for contacting us. According to our research, you may need to buy two surface elements 8", part number PS2339242, and two coil burner elements 6", part number PS2368974. You may also need to buy two 8" drip bowls, part number PS437595, and two 6" drip bowls, part number PS437596. We hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Karen
July 30, 2021
Is this element compatible with a Whirlpool stove model rf263lxtt?
For model number PS2368974
PartSelect logo
Hello Karen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11743366. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Karen
July 29, 2021
Is this burner element compatible with Whirlpool stove?
For model number PS2368974
PartSelect logo
Hello Karen, Thank you for your inquiry. In order to verify if this part will fit your model, may we have the model number of your stove? We look forward to hearing from you.

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2368974
Manufacturer Part Number: 318372211
Brand
Model Number
Description
Tappan
13-3008-00-01
Cooktop - Electric
Tappan
13-3008-23-01
Cooktop - Electric
Tappan
13-3008-45-01
Cooktop - Electric
Tappan
13-3008-57-01
Cooktop - Electric
Tappan
13-3008-66-01
Cooktop - Electric
Tappan
13-3028-00-01
Cooktop - Electric
Tappan
13-3028-00-02
Cooktop - Electric
Tappan
13-3028-08-02
Cooktop - Electric
Tappan
13-3028-23-01
Cooktop - Electric
Tappan
13-3028-23-02
Cooktop - Electric
Tappan
13-3028-45-01
Cooktop - Electric
Tappan
13-3028-57-01
Cooktop - Electric
Tappan
13-3028-66-01
Cooktop - Electric
Tappan
13-3626-00
Range - Tappan Range/Stove/Oven Model 13-3626-00/01 (13362600/01, 13 3626 00/01) Parts
Tappan
13-3626-23
Range - Tappan Range/Stove/Oven Model 13-3626-23/01 (13362623/01, 13 3626 23/01) Parts
Tappan
13-3628-00-01
Cooktop - Electric, Countertop
Tappan
13-3628-00-02
Cooktop - Electric, Countertop
Tappan
13-3628-00-03
Cooktop - Electric, Countertop
Tappan
13-3628-00-04
Cooktop - Electric, Countertop
Tappan
13-3628-00-05
Cooktop - Electric, Countertop
Tappan
13-3628-08-01
Cooktop - Electric, Countertop
Tappan
13-3628-08-02
Cooktop - Electric
Tappan
13-3628-08-03
Cooktop - Electric
Tappan
13-3628-08-05
Cooktop - Electric
Tappan
13-3628-23-01
Cooktop - Electric
Tappan
13-3628-23-02
Cooktop - Electric
Tappan
13-3628-23-03
Cooktop - Electric
Tappan
13-3628-23-04
Cooktop - Electric
Tappan
13-3628-23-05
Cooktop - Electric
Tappan
13-3628-32-04
Cooktop
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service