Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrew M - April 28, 2021
Verified Purchase
Perfect fit for Kenmore Elite
Replaced the boot of my Kenmore Elite 417.41102000 and it was a perfect fit. Not that difficult to install except the spring needed two people to get installed since it doesn't have a screw to loosen it. Hopefully this will give me several more years of life on my washing machine since due to the boot being damaged I was getting a lot of clothing ripped.
★★★★★
★★★★★
Bert S - June 19, 2019
Verified Purchase
Works as expected
Fast service. Best price.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 1.1 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Original bellow had 2 largish holes in the upper left quadrant; random leaking.
Bought new part. #1 Lesson learned: Always inspect the actual part number of the ordered/received part. Verify with number marked on the item somewhere. We did not do this and turned out we reinstalled a slightly smaller bellow (wrong part number received in shipment). We were able to fully install it but it was minutely not laying perfectly around the diameter. So minor we did not notice. We did have great difficulty installing though. Anyway, after 1st test run, bellow already had developed a small hole in bottom right quadrant from rubbing on the drum. Left a bunch of gray powdery debris on the drum too. We did not realize error until that point. Took bellow off again to verify part number on it. It was wrong. That explained why the door was so very tight to close and difficult to open. Other than all that, use the video to do the install. It was free to view and easy to follow.
Other Parts Used:
Michelle from Loves Park, IL
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
16 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ELECTRONIC COMPONENT
Still waiting on the part. It apparently is on back order and I'm still waiting to get the part to try and repair the dryer.
I estimate an hour to replace the part if I ever get the part.
Other Parts Used:
Elmer from JACKSONVILLE, FL
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lynnell
January 3, 2018
My boot has mold covering quit a bit of it. I want to replace the boot. Can you send me directions on how to remove the boot and then replace it with a new one.
For model number 417.41100000
Hi Lynnell, Thank you for the question. Here is a link to a video on how to remove and install a bellow/boot seal. The appliance is not the same but the same basic steps. Hope this helps!
https://www.youtube.com/watch?v=X80lcseltP0
15 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
July 5, 2019
Need a boot it leaks out the door
For model number 11047561601
Hello Gary, thank you for inquiring. The replacement for your model is Bellow part PS11748353.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ross
February 21, 2020
Which boot seal can i order that will fit a Kenmore model # 592 49196 01
For model number 592-49196 01
Hello Ross.
Thank you for your question. We have looked into your model number 592-49196 01 and have discovered that the boot seal that fits your model would be under part number PS4211426. We hope this helps you.
Do all front load washing machines have rubber gasket's that are impregnated with a scented, antimicrobial substance to prevent nasty odors?
I have an Electrolux ELFW7637AT. Can this rubber gasket be replaced with one that does not smell? If not, how long does the smell take to go away?
Could you suggest front load machines with non chemical coated rubber gaskets. Thanks
For model number ELFW7637AT
Hi Jill, thank you for the great question. Electrolux uses a patented rubber gasket that is impregnated with a scented, antimicrobial substance to prevent unpleasant odors. Peppermint oil and citrus juices or oils are great at cutting through strong smells. Apply one or the other to a dampened cloth and wipe down the entire surface of the gasket. Even without these methods, the gasket smell will slowly dissipate by itself. You can not replace Electrolux gaskets with another manufacturer's gasket. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Russ
November 17, 2022
I think I need to replace the door boot gasket on my Electrolux Luxcare washing machine (Model # EFL5627UTT) because it has what appears to be black residue oozing out of the rubber in little black splotches. It has a strange but semi-pleasant (not noxious or nasty) smell. I think it may be mold, but I’ve used white vinegar and baking soda to try and clean it off, but the mold appears to be coming from inside the rubber gasket itself. Please help me find the correct part.
For model number EFL5627UTT
Hello Russ, thank you for contacting us. We have researched your model and found that the part you are looking for is bellow, part number PS12731388. If you require assistance to place an order, please contact customer service. We hope that helps!
I need to replace the bellow and wanted to be sure and get the correct one. What would the bellow number be for my washer. It is an Electrolux
For model number EFLW417SIW
Hi Beverly, thank you for contacting us. The compatible Bellow for your model is part number PS11766094. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I need a new boot seal for this washer due to it being moldy, what one do I need for this washer? And is this a common thing to happen and or how do I prevent it from getting moldy again?
For model number EFLS627UTT0
Hello Dylan, Thank you for the question. To prevent the mold we suggest leaving the door open a bit after use to let the Bellow Dry. You can also keep a rag handy to wipe the bellow down after a wash. We have researched the model you have provided and have found the part you are looking for is Part #: PS12731388. We hope this information helps!
I need a new door boot seal for my washer model ATF6700FS1, Frigidaire. What model should I buy?
For model number ATF6700FS1
Hello Eliane, thank you for reaching out. Based on our research, the bellow kit, part number PS1148773, is compatible with your model. Good luck with your repair!
Need to order a need boot seal. Whitt part do I need to order?
For model number EFLW417SIW0
Hi Rosemary, thank you for reaching out. The compatible part for your model is the bellow gasket, part number PS11766094. We hope this is what you were looking for!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2342392
Manufacturer Part Number: 134616100
